The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   parking brake shoes (https://67-72chevytrucks.com/vboard/showthread.php?t=640289)

61K10 08-20-2014 03:22 PM

parking brake shoes
 
time to rebuild my park-brake shoes,(2000 1500z-71) it does not work at all. I under stand how to replace them, but was wondering do they mess up the inside of the rotors? you can put the p-brake on and drive forward and just feel a little drag. the cable has been adj all the way. should i just rebuild everything--new rotors and pads? thanks in adv.

truckdude239 08-21-2014 09:43 AM

Re: parking brake shoes
 
pull thr rotor there are adjusters just like drum brakes to adjust the shoes back out

61K10 08-21-2014 12:09 PM

Re: parking brake shoes
 
thanks for the tip. never had one apart before.

rkn463 08-22-2014 08:37 AM

Re: parking brake shoes
 
There were actually two types available when I went to do this on my 04. Mine had the one piece shoes and like yours were completely shot. I replaced them and they work like new.

-Richard

61K10 08-22-2014 12:24 PM

Re: parking brake shoes
 
thanks Richard. mine don't make any noise or scraping sound when applied. just wondered if i will need new rotors. I do have new shoes and adj kit.

rkn463 08-22-2014 01:35 PM

Re: parking brake shoes
 
Quote:

Originally Posted by 61K10 (Post 6812170)
thanks Richard. mine don't make any noise or scraping sound when applied. just wondered if i will need new rotors. I do have new shoes and adj kit.

No noise from mine other, the thing I couldn't figure out is what happened to them, I never even set the parking brake! I just have to have a working brake to pass inspection every year.

If yours does turn out to have the one piece style it looks like the axle would have to come out to replace hem but I was able to get them off without that.

Let us know how ours turns out.

-Richard

pamoffa 08-29-2014 09:08 PM

Re: parking brake shoes
 
I did my 2003 a few years ago and had trouble getting the rotors off, I think the e brake pads were binding causing the rotors to get stuck. I used a puller to get the rotors off. I replaced the dust shields at the same time. the reason I think the pads binded was the little screw that holds one side must have been long gone.


All times are GMT -4. The time now is 01:22 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com