69 pro touring/ autocross.
 

Sold my 68 step ls1 truck and decided I wanted a little nicer truck with a great handling suspension and of course ls drivetrain. The truck as I bought from a friend . He has already put rockers in and started shaving the firewall .

http://i803.photobucket.com/albums/y...015_175643.jpg
Got my ride tech front adjustable coilover suspension.
http://i803.photobucket.com/albums/y...025_124343.jpg
Installing a high hump tunnel . Truck will have a built t56.
http://i803.photobucket.com/albums/y...029_191352.jpg
http://i803.photobucket.com/albums/y...029_191401.jpg
Cut holes in crossmember and welded in 4" pipe to rout exhaust through.
Welded up my trailing arms
http://i803.photobucket.com/albums/y...101_182611.jpg
Got a factory core support with the truck that was in pretty good shape with the exception of minor rust on the bottom so I made some patch panels and welded them in.
http://i803.photobucket.com/albums/y...102_181733.jpg
http://i803.photobucket.com/albums/y...103_202909.jpg
Got some in rail notches and started fitting them in lastnight.
On the way I have a complete new bed 18x10 wheels front and rear , my t56, and I pick up a 2004 ls1 on Tuesday.
I've got started on my engine wiring harnes. This is just a mock up motor.
http://i803.photobucket.com/albums/y...106_184554.jpg
I'll be running this holley intake with a adapter I made to run the t.b. vertical using a round carb style air filter assembly.
http://i803.photobucket.com/albums/y...020_203251.jpg

Re: 69 pro touring/ autocross.
 

Better picture of the firewall and cab.
http://i803.photobucket.com/albums/y...018_202126.jpg

Re: 69 pro touring/ autocross.
 

Welded 4 " pipe in to rout the exhaust through
. http://i803.photobucket.com/albums/y...1_144920-1.jpg

Re: 69 pro touring/ autocross.
 

Subscribed, will be keeping an eye on this. We have similar plans and are in about the same stage of the build.

Re: 69 pro touring/ autocross.
 

Cool idea with the throttle body, never seen that done. Hope it will clear your hood...Looking good.

Re: 69 pro touring/ autocross.
 

I'm in on this

Re: 69 pro touring/ autocross.
 

I'll be running 4 wheel disc using d52 calipers and captain fab ' s rear brackets.
http://i803.photobucket.com/albums/y...107_190345.jpg

Re: 69 pro touring/ autocross.
 

Got some progress done this weekend. Got my mock up motor installed and my t56 came in friday. I also got my fuel tank mock up and made a mounting system for it. Headers ate suppose to be here Wednesday along with the new bed . Wheels should be here soon also.
http://i803.photobucket.com/albums/y...109_170837.jpg
http://i803.photobucket.com/albums/y...109_180328.jpg
http://i803.photobucket.com/albums/y...109_181709.jpg

Re: 69 pro touring/ autocross.
 

Got a little work done this morning. Made a trans x-member and got my headers test fitted. Also this week I picked up my motor. It's not in aby pictures but it's a 2004 ls1 go block that was built by a local well known engine builder Gary Grimes aka Grimes twister engines. It has roll master adjustable timing set crane cam , arp throughout , can't Remer brand but also aftermarket pistons and rings.
http://i803.photobucket.com/albums/y...115_103113.jpg
http://i803.photobucket.com/albums/y...115_143647.jpg
http://i803.photobucket.com/albums/y...3_214746-1.jpg
http://i803.photobucket.com/albums/y...3_212644-1.jpg
also made some coil relocation brackets.
http://i803.photobucket.com/albums/y...1_213603-1.jpg

Re: 69 pro touring/ autocross.
 

I am doing this also and bought a small section of pipe to use. It 1/8 in thick but it looks like you used something a bit thicker. Do you think 1/8 will work?

Re: 69 pro touring/ autocross.
 

I'm sure 1/8 would be fine. This is just what I had.

Re: 69 pro touring/ autocross.
 

Did some more frame x-ing and made a track bar bracket. I'll have to finish welding tomorrow I ran out of wire.
http://i803.photobucket.com/albums/y...116_172714.jpg
http://i803.photobucket.com/albums/y...116_171626.jpg

Re: 69 pro touring/ autocross.
 

Nice buildup, I would go with stouter trailing arms ;)

Re: 69 pro touring/ autocross.
 

Nice build. Going to tag along.

Re: 69 pro touring/ autocross.
 

Wanted to test fit the cab lastnight to check for the trans tunnel fitment before I finished boxing the chassis and got it ready for paint.
http://i803.photobucket.com/albums/y...117_203058.jpg
Had to do little more trimming on the floor for the shifter location
http://i803.photobucket.com/albums/y...117_203118.jpg
I really like this view with the frame bracing
http://i803.photobucket.com/albums/y...117_203139.jpg

Re: 69 pro touring/ autocross.
 

What tranny are u using

Re: 69 pro touring/ autocross.
 

T56

Re: 69 pro touring/ autocross.
 

Great build! All the parts we sell... Nice to see this combo being done, great job!

Keep the pics coming!

MCB

Re: 69 pro touring/ autocross.
 

What headers are you running?

Re: 69 pro touring/ autocross.
 

They are from Gibson. They come in stainless or ceramic coated. I'm very pleased with the quality. I am using an abnormal motor mount setup for these trucks so I can't vouch how they would fit in most other situations. The headers are made for our trucks though.

Re: 69 pro touring/ autocross.
 

Nice looking start. I'm in.

Re: 69 pro touring/ autocross.
 

Cool build.

http://i803.photobucket.com/albums/y...115_143647.jpg

Not sure if it will be an issue, but I built a trans crossmember for a LS swap G-body a few years ago, similar to what you've built, and the "channel" section of it where the exhaust passes under just didn't have enough strength for my liking. Seemed stout on the weld bench, but with the weight of the trans on it, it had to much flex. Not sure if that will be a problem with yours or not, since yours appears to be quite a bit wider and gussetted nicely, but something to be on the watch for.

Re: 69 pro touring/ autocross.
 

I've thought about that. I might add some more gussets under the exhaust arches to add some strength. Thanks for the input.

Re: 69 pro touring/ autocross.
 

Are you planning to use coilovers front and rear, or are you going to use just a spring and shock combo in the back?

Can't wait to see the 18x10 square setup, I have been trying to figure out what I want to go with.

Re: 69 pro touring/ autocross.
 

Just coilover in front. With rear drop springs. Gonna mount rear shocks outboard of frame. Wheels should be here next week hopefully.