The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Door Hinge Repair/Rebuild (https://67-72chevytrucks.com/vboard/showthread.php?t=651124)

CRGRS 66

11-27-2014 01:09 AM

Door Hinge Repair/Rebuild

1 Attachment(s)

Hey guys, I don't see anything in the FAQ'S on fixing door hinges. Do I press the pins out, or do I need to grind off the end of the pin that I am pointing to in the picture? I am pretty sure that I ordered new pins, have to check my new parts stash.

boat	11-27-2014 02:00 AM

Re: Door Hinge Repair/Rebuild

I grind mine down and punched it out and replaced with new one, I have a video on doing mine but don't know how to put it on here

CRGRS 66

11-27-2014 09:22 AM

Re: Door Hinge Repair/Rebuild

Thank you, if you have the video on you tube, could you post the link?

62 Barnfind

11-27-2014 10:08 AM

Re: Door Hinge Repair/Rebuild

I used a cut off wheel to cut the ends off. The sprayed with WD 40 and knocked them out. The replacements are longer so I cut them to look like the originals.

boat	11-27-2014 12:45 PM

Re: Door Hinge Repair/Rebuild

Quote:

Originally Posted by CRGRS 66 (Post 6935681)

Thank you, if you have the video on you tube, could you post the link?

Haven't posted a link in a while but you can go to Gibson63 on YouTube that's my Channel after rebuilding my hinges they worked fine after installing on the cab

All times are GMT -4. The time now is 02:03 AM.