The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   MI 3 speed crossmember (https://67-72chevytrucks.com/vboard/showthread.php?t=655079)

pimpston65 01-03-2015 08:45 PM
3 speed crossmember
 
im looking for an original 3 one the tree crossmember for the tail section,bellhousing bolts,and engine lift brackets for a 292. send pics and prices...

Cruzinlow 01-04-2015 01:03 AM
Re: 3 speed crossmember
 
I have one off a 65 that had a 292 with three on the tree, I'll send pics

pimpston65 01-04-2015 11:53 AM
Re: 3 speed crossmember
 
Quote:
Originally Posted by Cruzinlow (Post 6984134)
I have one off a 65 that had a 292 with three on the tree, I'll send pics
sweet, awaiting pics and price!!!

Cruzinlow 01-04-2015 11:35 PM
Re: 3 speed crossmember
 
2 Attachment(s)
Quote:
Originally Posted by pimpston65 (Post 6983704)
im looking for an original 3 one the tree crossmember for the tail section,bellhousing bolts,and engine lift brackets for a 292. send pics and prices...
Ok this is what I have, cross member came off a 65 c10 with a 292 and three on the tree and it will need a good cleaning. It has grind marks where I used a grinder to remove rivets. the two plates still has the revits attached and will need to be removed. If you need to see more pics let me know. i'll take 20.00 plus shipping

V.

pimpston65 01-05-2015 01:39 AM
Re: 3 speed crossmember
 
Quote:
Originally Posted by Cruzinlow (Post 6985769)
Ok this is what I have, cross member came off a 65 c10 with a 292 and three on the tree and it will need a good cleaning. It has grind marks where I used a grinder to remove rivets. the two plates still has the revits attached and will need to be removed. If you need to see more pics let me know. i'll take 20.00 plus shipping

V.
very nice, but the crossmember im looking for is for the tail section. i have the bellhousing crossmember. any chance you have that piece?

Cruzinlow 01-05-2015 07:50 AM
Re: 3 speed crossmember
 
Quote:
Originally Posted by pimpston65 (Post 6986032)
very nice, but the crossmember im looking for is for the tail section. i have the bellhousing crossmember. any chance you have that piece?
Wasn't sure which one I had sorry about that, don't have any others, good luck with your search.

V.

pimpston65 01-05-2015 08:20 AM
Re: 3 speed crossmember
 
Quote:
Originally Posted by Cruzinlow (Post 6986137)
Wasn't sure which one I had sorry about that, don't have any others, good luck with your search.

V.
thks for checking

rickoner 01-05-2015 02:31 PM
Re: 3 speed crossmember
 
That's the only crossmember that holds the transmission. Let me dig through my bolt stash. I should have the bellhousing bolts. I'm assuming that they'd be the same that was on the 283?

pimpston65 01-05-2015 03:28 PM
Re: 3 speed crossmember
 
Quote:
Originally Posted by rickoner (Post 6986587)
That's the only crossmember that holds the transmission. Let me dig through my bolt stash. I should have the bellhousing bolts. I'm assuming that they'd be the same that was on the 283?
thks for the bolts, no worries. its a crossmember like the auto trans would have, i will find it im sure. thks for the awesome piece!!!

pimpston65 01-05-2015 09:37 PM
Re: 3 speed crossmember
 
2 Attachment(s)
i think i should have asked if this is the correct trans for my application first!!! im looking for the correct trans for a K10 with 3 speed on the column and also what kind of tran is this i think its a sm318

pimpston65 01-05-2015 10:00 PM
Re: 3 speed crossmember
 
1 Attachment(s)
another pic

pimpston65 01-05-2015 10:20 PM
Re: 3 speed crossmember
 
Quote:
Originally Posted by pimpston65 (Post 6987195)
another pic
does anyone have a tail section without the mounting "foot"?

oem4me 01-05-2015 10:53 PM
Re: 3 speed crossmember
 
I've seen those before. I think I remember someone telling me the tail shaft mounts were for early Corvettes.

pimpston65 01-05-2015 11:17 PM
Re: 3 speed crossmember
 
1 Attachment(s)
i found this one without the "foot"

pimpston65 01-05-2015 11:52 PM
Re: 3 speed crossmember
 
Quote:
Originally Posted by pimpston65 (Post 6987366)
i found this one without the "foot"
i think ima grind down the "foot" and bead blast it and fake it out as if it was original, thks for all the imput!!!


All times are GMT -4. The time now is 02:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com