MI 3 speed crossmember

[pimpston65]

im looking for an original 3 one the tree crossmember for the tail section,bellhousing bolts,and engine lift brackets for a 292. send pics and prices...

[Cruzinlow]

I have one off a 65 that had a 292 with three on the tree, I'll send pics

[pimpston65]

Originally Posted by Cruzinlow

I have one off a 65 that had a 292 with three on the tree, I'll send pics

sweet, awaiting pics and price!!!

[Cruzinlow]

Originally Posted by pimpston65

im looking for an original 3 one the tree crossmember for the tail section,bellhousing bolts,and engine lift brackets for a 292. send pics and prices...

Ok this is what I have, cross member came off a 65 c10 with a 292 and three on the tree and it will need a good cleaning. It has grind marks where I used a grinder to remove rivets. the two plates still has the revits attached and will need to be removed. If you need to see more pics let me know. i'll take 20.00 plus shipping

V.

[pimpston65]

Originally Posted by Cruzinlow

Ok this is what I have, cross member came off a 65 c10 with a 292 and three on the tree and it will need a good cleaning. It has grind marks where I used a grinder to remove rivets. the two plates still has the revits attached and will need to be removed. If you need to see more pics let me know. i'll take 20.00 plus shipping

V.

very nice, but the crossmember im looking for is for the tail section. i have the bellhousing crossmember. any chance you have that piece?

[Cruzinlow]

Originally Posted by pimpston65

very nice, but the crossmember im looking for is for the tail section. i have the bellhousing crossmember. any chance you have that piece?

Wasn't sure which one I had sorry about that, don't have any others, good luck with your search.

V.

[pimpston65]

Originally Posted by Cruzinlow

Wasn't sure which one I had sorry about that, don't have any others, good luck with your search.

V.

thks for checking

[rickoner]

That's the only crossmember that holds the transmission. Let me dig through my bolt stash. I should have the bellhousing bolts. I'm assuming that they'd be the same that was on the 283?

[pimpston65]

Originally Posted by rickoner

That's the only crossmember that holds the transmission. Let me dig through my bolt stash. I should have the bellhousing bolts. I'm assuming that they'd be the same that was on the 283?

thks for the bolts, no worries. its a crossmember like the auto trans would have, i will find it im sure. thks for the awesome piece!!!

[pimpston65]

i think i should have asked if this is the correct trans for my application first!!! im looking for the correct trans for a K10 with 3 speed on the column and also what kind of tran is this i think its a sm318

[pimpston65]

another pic

[pimpston65]

Originally Posted by pimpston65

another pic

does anyone have a tail section without the mounting "foot"?

[oem4me]

I've seen those before. I think I remember someone telling me the tail shaft mounts were for early Corvettes.

[pimpston65]

i found this one without the "foot"

[pimpston65]

Originally Posted by pimpston65

i found this one without the "foot"

i think ima grind down the "foot" and bead blast it and fake it out as if it was original, thks for all the imput!!!