The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   helping out with locating parts (https://67-72chevytrucks.com/vboard/showthread.php?t=655740)

gasmn1620 01-09-2015 12:51 PM

helping out with locating parts
 
What parts are particulary hard to find for our model trucks/suvs that I could grab at my local pick-n-pull, while I'm there, that would help you guys out. Not looking to make anything off of them, just pass them on to you guys. You'd have to cover the cost and shipping, but I'll be there a lot and wouldn't mind helping some of you out. Hopefully someone can return the favor one day.

flashed 01-09-2015 01:39 PM

Re: helping out with locating parts
 
good 3 point seat belts ,floor mats ,stepside light covers on side of fenders .

gasmn1620 01-09-2015 01:47 PM

Re: helping out with locating parts
 
I'll see what they have. I'm going next week... maybe this weekend if I get time. I need a few things that is going to take a while to get off the old trucks there (suburban bumpers, set of a-arms). There were a lot of seat belts and stuff in there. I believe there was a tan set in that burb.

flashed 01-09-2015 03:42 PM

Re: helping out with locating parts
 
Ralley wheels are also good to have at least around here they are getting harder to come by .

gasmn1620 01-09-2015 05:10 PM

Re: helping out with locating parts
 
I think I know where 2 or 3 sets of those are.

old Rusty C10 01-09-2015 05:36 PM

Re: helping out with locating parts
 
I need all the springs on an older clutch set up 73-80 the one frm the z bar and frame and the springs under the dash board this is a non hydraulic setup

natedogg 01-09-2015 08:51 PM

Re: helping out with locating parts
 
Original dash pads that are not cracked up are hard to find. If you find one, I would be more than happy to pay ya and shipping. I need a charcoal grey dash pad, but I will take what I can get.

77c10 01-10-2015 11:25 AM

Re: helping out with locating parts
 
Quote:

Originally Posted by natedogg (Post 6993103)
Original dash pads that are not cracked up are hard to find. If you find one, I would be more than happy to pay ya and shipping. I need a charcoal grey dash pad, but I will take what I can get.

Those are a fabled creature!

bdiamond 01-10-2015 02:59 PM

Re: helping out with locating parts
 
Quote:

Originally Posted by flashed (Post 6992775)
Ralley wheels are also good to have at least around here they are getting harder to come by .

The 6.5" and 8" rallys are still pretty plentiful around here. Its the 7" wheels that are hard to find.

Sodak 01-10-2015 05:48 PM

Re: helping out with locating parts
 
On trucks with the dual tanks ..if you find a set let me know would like a set of steel/aluminum skid plates.Have only seen one pair of these.

UKNOWME 01-10-2015 05:53 PM

Re: helping out with locating parts
 
Quote:

Originally Posted by natedogg (Post 6993103)
Original dash pads that are not cracked up are hard to find. If you find one, I would be more than happy to pay ya and shipping. I need a charcoal grey dash pad, but I will take what I can get.

X2
I need one for a 78 model. Don't care about color just no cracks. I need the clips too because my dash pad is gone altogether.

gasmn1620 01-11-2015 09:52 PM

Re: helping out with locating parts
 
U cracked dash pads in the junkyard is like looking for a virgin in a strip club. I checked. All the interiors are junk.

I think there was an early 80s manual shift there. I'll make a list of all your requests and take it with me.

Jeepwm69 01-12-2015 02:10 PM

Re: helping out with locating parts
 
seat sliders bring pretty good money online. I've been nosing around looking for some locally.

Putting a 96 60/40 seat in my 83. I kept my original sliders on my original bench in case I ever want to put it back in. Already got the 60 portion in the truck, but want some sliders to try to get the 40 part in on the passenger side.

GRADYS Performance 01-13-2015 02:20 PM

Re: helping out with locating parts
 
I need a Quadrajet mounted throttle cable bracket that has the mount for the TV cable for a 700R4/4L60 transmission.

gasmn1620 01-13-2015 02:31 PM

Re: helping out with locating parts
 
send me a pic of things you are looking for specifically. pm me and I'll give you my cell number. Going picking saturday.

gasmn1620 01-17-2015 04:43 PM

Re: helping out with locating parts
 
Didn't pull any extra stuff today. By the time i got done pulling a arms i was beat. I'll go back this week.


All times are GMT -4. The time now is 07:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com