The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Transmission swap (https://67-72chevytrucks.com/vboard/showthread.php?t=656019)

ratrodsrule1

01-11-2015 01:50 PM

Transmission swap

Will a 3 speed manual transmission from a 1981 C10 match up to a 1967 C10 bell housing ?

MikeB

01-13-2015 06:01 PM

Re: Transmission swap

I'd say yes, as will just about any GM manual trans, including Muncie and B-W 4-speeds.

With this bump to the top, maybe someone else will chime in.

geezer#99

01-13-2015 10:51 PM

Re: Transmission swap

You might need a bearing retainer adapter to mate your new tranny to the old bellhousing.
The hole the bearing retainer registers in is larger on the older bellhousing.
You might need one of these.
http://www.summitracing.com/int/part...6078/overview/

All times are GMT -4. The time now is 06:38 AM.