The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Door jamb wire tube (https://67-72chevytrucks.com/vboard/showthread.php?t=657270)

Jaysonb

01-22-2015 12:25 AM

Door jamb wire tube

I am going to put some speakers in my doors, I have manual locks and windows. I was hoping someone could snap a picture of where the wires pass through the jamb on power doors. It looks like lmc sells the rubber tubes. I think it might be to shabby to just run the bare wires through the jamb. Thanks in advance.

tylerg85

01-22-2015 10:03 AM

Re: Door jamb wire tube

I'll post one for you when I go to lunch

motornut

01-22-2015 10:45 AM

Re: Door jamb wire tube

2 Attachment(s)

I got a couple of good ones here lol

Jaysonb

01-22-2015 11:04 PM

Re: Door jamb wire tube

Thanks. Looks to be centered between the top and bottom hinges.

motornut

01-22-2015 11:12 PM

Re: Door jamb wire tube

Quote:

Originally Posted by Jaysonb (Post 7015370)

Thanks. Looks to be centered between the top and bottom hinges.

I believe the holes are dimpled

chengny

01-22-2015 11:25 PM

Re: Door jamb wire tube

If you look closely, a truck that did not come from the factory with PL/PW will have a series of 4 dimples on the door jamb:

http://s5d3.turboimagehost.com/t1/21964074_HPIM2405.jpg

Use the top and bottom ones as guides for positioning the flexible conduit flange on the cab side. They line right up with the holes in an OEM flange. Just drill them out and pop rivet the flange in place.

I forget whether there is a corresponding set of dimples on the door.

All times are GMT -4. The time now is 06:08 PM.