The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - dumb question but... (https://67-72chevytrucks.com/vboard/showthread.php?t=666361)

king-918

04-07-2015 02:53 PM

dumb question but...

1 Attachment(s)

What vehicles are these brackets found on?

JWall

04-07-2015 03:00 PM

Re: dumb question but...

Looks like the aluminum brackets on the 90-94 Chevy Truck Motors.

SCOTI

04-07-2015 10:15 PM

Re: dumb question but...

88-94 GM trucks (4.3, 5.0, 5.7L) & same years S10's w/the 4.3L v6.

enaberif

04-07-2015 10:16 PM

Re: dumb question but...

It will also require all accessories as well and a reverse flow water pump... Ends up being $$$

SCOTI

04-07-2015 11:00 PM

Re: dumb question but...

Quote:

Originally Posted by enaberif (Post 7123989)

It will also require all accessories as well and a reverse flow water pump... Ends up being $$$

Depends on how you shop....

You can purchase everything brand spankin new for $900 from Summit. While not 'budget', it's half of what Billet Specialties (Tru-Trac) or Vintage Air (Frontrunner) serp set-ups go for & comes w/new accessories.

Or, you can snag the brackets from a used source & purchase a new alt, water pump, pwr steering pump, a/c comp, belt, & idler for approx $500. These set-ups are engineered to work for years/miles.

kalbert

04-07-2015 11:34 PM

Re: dumb question but...

If you shop right you can snatch a whole motor, scrape the brackets and accessories you need off, and sell the bare motor for about what you paid for the whole thing.

piecesparts

04-08-2015 12:04 AM

Re: dumb question but...

If you get an engine out of a Camaro, the brackets are further apart at the top, to allow for the TPI intake to run through.

All times are GMT -4. The time now is 11:13 AM.