The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Gas tank trouble (https://67-72chevytrucks.com/vboard/showthread.php?t=666923)

Bagged1972 04-12-2015 03:41 PM

Gas tank trouble
 
How is going people. I bought a new gas tank yesterday from the charlotte auto fair for my 1971 and today I went to install it but I have seen to have ran into a bit of a problem with it if I get the neck right in the grommet the holes are off and if I get the hole lined up right the neck is off And I can't figure out why. So maybe Yall can tell me something cause I'm sure I'm not the only one who has had this problem. Thanks for your time. http://i921.photobucket.com/albums/a...pslcnbfx3z.jpghttp://i921.photobucket.com/albums/a...psejt4gbcw.jpg

hugger6933 04-12-2015 06:16 PM

Re: Gas tank trouble
 
Can you get it in where you can start the retaining tabs and bolts maybe a couple on top and bottom then try moving the tank where you want/need it to go and then try tightening the straps down so it won't move. You should be able to get it where it is satisfying to you. Jim

sduckworth13 04-12-2015 06:52 PM

Re: Gas tank trouble
 
What brand tank is it ?, I've never seen one that the neck sticks out that far.

Bagged1972 04-12-2015 07:17 PM

Re: Gas tank trouble
 
Quote:

Originally Posted by sduckworth13 (Post 7130369)
What brand tank is it ?, I've never seen one that the neck sticks out that far.

It's a counterpart tank

sduckworth13 04-12-2015 07:39 PM

Re: Gas tank trouble
 
It looks like the gas cap has some sort of sheetmetal collar under it, did you put that on there.

sduckworth13 04-12-2015 07:48 PM

Re: Gas tank trouble
 
1 Attachment(s)
I just went out and looked at mine. It sticks out probably at far as yours. I'm going to replace the gasket on it because the one on there is crusty. I bought this truck about a year ago, it was cobbled together by the previous owner. The filler neck is JB welded on. I'm switching cab out soon so I haven't mess with the tank to see why the neck sticks out a foot.

PanelDeland 04-12-2015 09:24 PM

Re: Gas tank trouble
 
I'm with duckworth, that neck flare doesn't look right. Check the measurements on it. I'm guessing wrong tank, maybe a loose one put in a handy box?

swamp rat 04-12-2015 09:56 PM

Re: Gas tank trouble
 
Are you sure the tank is all the way to the passanger side as far as it should go? looks to me like the grommet is the sane size as the larger diameter of the filler neck.

It is kinda odd, i don't think my stock tank stuck out that far before i took it out.

EDIT: just found a pic, it did stick out a bit.. scroll down.

http://67-72chevytrucks.com/vboard/s...&postcount=377

Bagged1972 04-13-2015 12:02 AM

Re: Gas tank trouble
 
Quote:

Originally Posted by sduckworth13 (Post 7130439)
It looks like the gas cap has some sort of sheetmetal collar under it, did you put that on there.

No that's the way it came. But I came up with one or two ways of fixing the problem. The first one is get the neck sitting right in the grommet and just drill new mounting holes around the tank or I could cut down the filler neck and have it tig welded back up.

sduckworth13 04-13-2015 12:14 AM

Re: Gas tank trouble
 
Quote:

Originally Posted by Bagged1972 (Post 7130878)
No that's the way it came. But I came up with one or two ways of fixing the problem. The first one is get the neck sitting right in the grommet and just drill new mounting holes around the tank or I could cut down the filler neck and have it tig welded back up.

That might be why the guy at the swap meet had it, because of the unfinished? collar on it. I'm just guessing though, but I've never seen one with a similar looking collar on it.

Bagged1972 04-13-2015 12:22 AM

Re: Gas tank trouble
 
Well I actually bought from a company called car and truck parts I think they are out of California but if I'm not mistaken all of there tanks are made like that. I'm thinking just drill new mounting holes would be the best and easiest fix to the problem but I don't know how far the neck is supposed to stick out

sduckworth13 04-13-2015 12:24 AM

Re: Gas tank trouble
 
I agree and then you don't get any debris in the tank. Good luck with it.

1968aj 04-10-2016 12:24 AM

Re: Gas tank trouble
 
wish I would have read this sooner. I have same problem with COUNTERPART tank.


All times are GMT -4. The time now is 08:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com