The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   NM WTB Brackets/Hardware for West Coast Mirrors (https://67-72chevytrucks.com/vboard/showthread.php?t=674399)

Clanky 06-21-2015 12:40 AM

WTB Brackets/Hardware for West Coast Mirrors
 
Hello,
I came across a pair of white west coast mirrors off of a '65 C20 that I want to install on my '66 K20, but they are missing the mounting brackets. I have both mirrors, the verticals for both sides and the brackets to attach the mirrors to the verticals, but none of the hardware to mount them to the truck doors. I need the brackets that attach the mirrors to the doors, one above and one below the window, and I need both sides. Does anyone have any leftover brackets to mount these bad boys? Even if you have just one that would be a start. My mirror are painted white.
Also, if you have these mirrors on your truck, how 'bout throwing up a photo showing the mounting bracket placement in relation to the wing/window vertical divider. Are you mirrors in the same place on the door on both sides of the truck?
Thanks much,
Karl

aerotruk63 06-21-2015 06:20 AM

Re: WTB Brackets/Hardware for West Coast Mirrors
 
You might consider adding a picture of the mirror assembly you have. There were several models available in those years.

Clanky 06-21-2015 10:23 AM

Re: WTB Brackets/Hardware for West Coast Mirrors
 
1 Attachment(s)
Hello aerotruk63,
You are so right, my bad. I attached a photo of the mirrors along with the dimensions. I have both mirrors and both 'C' brackets to attach the mirrors to, along with the clamp on the 'C' brackets that the mirrors attach to. I need pretty much everything else to mount these bad boys from the mirror to the truck. Do the below dimensions seem kinda large for a non-commercial truck or are these correct in size for C20/K20s? I was told they came off of a '65 Chevy C20, but.....who knows.
Manf: Velvac
Dims: 7-1/4" wide x 16-1/4" high
Even if you have just one of the brackets that would work I'd sure be interested.
Thanks much for the reply,
Karl

aerotruk63 06-21-2015 08:00 PM

Re: WTB Brackets/Hardware for West Coast Mirrors
 
These West Coast style mirrors were generally for the Medium and Heavy Duty's. Nothing to say they couldn't be found on the Light Duty's however.

I have a pair of NOS West Coast mirrors and brackets, but I don't have the part number handy from the boxes. They are Bubble Back style mirrors.

West Coast Juniors were more common on C10-C20.


All times are GMT -4. The time now is 10:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com