NM WTB Brackets/Hardware for West Coast Mirrors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Clanky · 06-21-2015, 12:40 AM

Hello,
I came across a pair of white west coast mirrors off of a '65 C20 that I want to install on my '66 K20, but they are missing the mounting brackets. I have both mirrors, the verticals for both sides and the brackets to attach the mirrors to the verticals, but none of the hardware to mount them to the truck doors. I need the brackets that attach the mirrors to the doors, one above and one below the window, and I need both sides. Does anyone have any leftover brackets to mount these bad boys? Even if you have just one that would be a start. My mirror are painted white.
Also, if you have these mirrors on your truck, how 'bout throwing up a photo showing the mounting bracket placement in relation to the wing/window vertical divider. Are you mirrors in the same place on the door on both sides of the truck?
Thanks much,
Karl

**aerotruk63** · 06-21-2015, 06:20 AM

You might consider adding a picture of the mirror assembly you have. There were several models available in those years.

Clanky · 06-21-2015, 10:23 AM

Hello aerotruk63,
You are so right, my bad. I attached a photo of the mirrors along with the dimensions. I have both mirrors and both 'C' brackets to attach the mirrors to, along with the clamp on the 'C' brackets that the mirrors attach to. I need pretty much everything else to mount these bad boys from the mirror to the truck. Do the below dimensions seem kinda large for a non-commercial truck or are these correct in size for C20/K20s? I was told they came off of a '65 Chevy C20, but.....who knows.
Manf: Velvac
Dims: 7-1/4" wide x 16-1/4" high
Even if you have just one of the brackets that would work I'd sure be interested.
Thanks much for the reply,
Karl

**aerotruk63** · 06-21-2015, 08:00 PM

These West Coast style mirrors were generally for the Medium and Heavy Duty's. Nothing to say they couldn't be found on the Light Duty's however.

I have a pair of NOS West Coast mirrors and brackets, but I don't have the part number handy from the boxes. They are Bubble Back style mirrors.

West Coast Juniors were more common on C10-C20.

06-21-2015, 12:40 AM	#1
Clanky Registered User Join Date: Jul 2012 Location: Roswell, NM Posts: 136	WTB Brackets/Hardware for West Coast Mirrors Hello, I came across a pair of white west coast mirrors off of a '65 C20 that I want to install on my '66 K20, but they are missing the mounting brackets. I have both mirrors, the verticals for both sides and the brackets to attach the mirrors to the verticals, but none of the hardware to mount them to the truck doors. I need the brackets that attach the mirrors to the doors, one above and one below the window, and I need both sides. Does anyone have any leftover brackets to mount these bad boys? Even if you have just one that would be a start. My mirror are painted white. Also, if you have these mirrors on your truck, how 'bout throwing up a photo showing the mounting bracket placement in relation to the wing/window vertical divider. Are you mirrors in the same place on the door on both sides of the truck? Thanks much, Karl

06-21-2015, 06:20 AM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: WTB Brackets/Hardware for West Coast Mirrors You might consider adding a picture of the mirror assembly you have. There were several models available in those years. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-21-2015, 10:23 AM	#3
Clanky Registered User Join Date: Jul 2012 Location: Roswell, NM Posts: 136	Re: WTB Brackets/Hardware for West Coast Mirrors Hello aerotruk63, You are so right, my bad. I attached a photo of the mirrors along with the dimensions. I have both mirrors and both 'C' brackets to attach the mirrors to, along with the clamp on the 'C' brackets that the mirrors attach to. I need pretty much everything else to mount these bad boys from the mirror to the truck. Do the below dimensions seem kinda large for a non-commercial truck or are these correct in size for C20/K20s? I was told they came off of a '65 Chevy C20, but.....who knows. Manf: Velvac Dims: 7-1/4" wide x 16-1/4" high Even if you have just one of the brackets that would work I'd sure be interested. Thanks much for the reply, Karl Attached Images

06-21-2015, 08:00 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: WTB Brackets/Hardware for West Coast Mirrors These West Coast style mirrors were generally for the Medium and Heavy Duty's. Nothing to say they couldn't be found on the Light Duty's however. I have a pair of NOS West Coast mirrors and brackets, but I don't have the part number handy from the boxes. They are Bubble Back style mirrors. West Coast Juniors were more common on C10-C20. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.