The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   72 Windshield HELP (https://67-72chevytrucks.com/vboard/showthread.php?t=678512)

strangestash72 08-04-2015 10:26 AM

72 Windshield HELP
 
Does anyone have any advise or tricks on installing the new windshield on my 72 c10 ? It has the chrome trim.

cooperhw 08-04-2015 11:24 AM

Re: 72 Windshield HELP
 
Quote:

Originally Posted by strangestash72 (Post 7263377)
Does anyone have any advise or tricks on installing the new windshield on my 72 c10 ? It has the chrome trim.

Do what I did. call the glass guy. He came out a couple weeks ago and installed my front and rear glass in my 68 for $200. I was at work and when I got home it was done.

You could look on Youtube. there are many videos on the subject if you want to try it yourself. I did it twice before. 50% success.

NorCalC20LWB 08-04-2015 12:03 PM

Re: 72 Windshield HELP
 
This is on my to do list eventually also. So, I personally have not done it, but in researching it seems to vary from "take your time, patience, and it's pretty straightforward" to "this %*#@ sucks, how does this go in!?". Here are a couple of links that may help, hope to hear how it went!

NorCalC20LWB 08-04-2015 12:08 PM

Re: 72 Windshield HELP
 
Could not post the link, try again....

https://www.youtube.com/watch?v=SOU_0HpS7To

cdowns 08-04-2015 03:41 PM

Re: 72 Windshield HELP
 
The big tip i have is dont break the glass

Andy4639 08-04-2015 06:14 PM

Re: 72 Windshield HELP
 
I put mine in with help from my daughter and son.

Put rope inside gasket from bottom to top with both ends of the rope in the top center to pull the gasket in and have some one putting pressure on it while you pull the rope ends a little each way and keep them even.
Get it started good and it will go right in. Having some plastic knives will help and a set of picks. Once it's in you can work the top corners into position. Use plenty of soap and water in a spray bottle also. Spray it down good before you start.
Also wash the gasket good before doing anything and let dry in the sun.
:chevy:

strangestash72 08-06-2015 10:02 AM

Re: 72 Windshield HELP
 
Thanks for the help and The links, Im going to attempt it this weekend.


All times are GMT -4. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com