The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   69 blazer disk brake swap? (https://67-72chevytrucks.com/vboard/showthread.php?t=683357)

v30crewcab 09-25-2015 08:30 AM

69 blazer disk brake swap?
 
buddy has a 69 k5 blazer 4x4, and wants to do a disk brake swap. anyone know of any complete kits for it? he'd like to do front and rear both. was thinking of swapping the front axle to a newer one but read somewhere they were wider.

andrewmp6 09-25-2015 09:15 AM

Re: 69 blazer disk brake swap?
 
As far as i know the front axle from a 73-87 will bolt in it,Not sure on if its wider or not.

argonaut 09-26-2015 01:13 AM

Re: 69 blazer disk brake swap?
 
I'm pretty sure that pickup d44 front axles are wider than blazers in the 60-72 years. But even if that is the case, no one will know but you.

Although another option would be to get the disk brake axle and then swap everything from the knuckles out onto your axle housing. You'll also need to use your inner axle shafts connected to the disk stub shafts. Great opportunity to install new ball joints and new u-joints.

For the rear 12 bolt, there are many kits to adapt small calipers. Don't buy the kit that CPP sells, it doesn't fit well in my experience.

v30crewcab 09-26-2015 05:10 PM

Re: 69 blazer disk brake swap?
 
if the truck axle is wider, the inner axles would be longer too. hows that gonna work? so cpp stuff dont work? hmm. was looking to get a kit so its quick and painless to do.

argonaut 09-26-2015 10:53 PM

Re: 69 blazer disk brake swap?
 
What you said is correct. That's why I suggested what I did.
Use your blazer axle housing and inner axle shafts. Use the outer shafts, knuckles, spindles, hubs and rotors from a disk brake axle.

argonaut 09-26-2015 10:56 PM

Re: 69 blazer disk brake swap?
 
It's not that the CPP stuff won't work. I bought it and made it work on my 2wd 12bolt. But it wasn't a good design, and I had to spend more money to make the parts work correctly, and the CPP folds wouldn't help.

v30crewcab 09-27-2015 04:59 PM

Re: 69 blazer disk brake swap?
 
can't swap later disc brake outer stubs, the ujoint sizes are different. so you gotta swap inners also, which means custom. guess we're gonna have to swap the whole axle out.

andrewmp6 09-28-2015 02:01 AM

Re: 69 blazer disk brake swap?
 
If he just wants a normal truck a 10 bolt front is fine,If he wants a off roader id think hard about a dana 60 gm or early dodge will do.

v30crewcab 09-28-2015 07:58 AM

Re: 69 blazer disk brake swap?
 
its just a driver.


All times are GMT -4. The time now is 11:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com