bracket for clutch pedal?
 

I'm going to swap a t56 into my 72 in place of the auto. What do I need to get a clutch pedal in it? Do I need to replace the bracket that holds the brake pedal with one from a manual truck?

Re: bracket for clutch pedal?
 

You should't have to change out too much cause there never was a big brake pedal for the auto. They were all the same in both types of truck. that is an upgrade I'm doing to mine that are autos, putting in a bigger brake pedal. Jim

Re: bracket for clutch pedal?
 

All you need is a clutch pedal and linkage or captainfab on the parts board makes some pretty cool hydraulic clutch parts as well. The pedal will slide directly into the auto brake pedal assembly.

Re: bracket for clutch pedal?
 

There is also a rectangular hole on the brake pedal bracket to mount a rubber bumper for the clutch pedal. It's like the bumper for the brake pedal.

Re: bracket for clutch pedal?
 

I'm getting the ball rolling on a tko600 swap in a '71 C10 and am looking for the clutch pedal, linkage and any other goodies I may need.

Re: bracket for clutch pedal?
 

This is an older post but it shows the parts you will need.

http://67-72chevytrucks.com/vboard/s...d.php?t=585023

The pedal and shaft will install into your existing assembly....

LockDoc