The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 65 Vent window rubber seal question (https://67-72chevytrucks.com/vboard/showthread.php?t=687385)

Wildman65

11-02-2015 08:55 PM

65 Vent window rubber seal question

Does the vent window need to come out to replace the rubber seals. There are 2 seals. I'm guessing the straight one pulls right out but was wandering about the other one?

68JOHNDEERE

11-03-2015 01:57 PM

Re: 65 Vent window rubber seal question

Yes you will need to remove the vent assembly to replace the seals. The lower pivot for the glass has a tension spring and retaining nut that you will need to remove, along with getting a upper pivot rivet replacement kit.

Lugnutz65

11-03-2015 02:25 PM

Re: 65 Vent window rubber seal question

Quote:

Originally Posted by Wildman65 (Post 7362979)

Does the vent window need to come out to replace the rubber seals. There are 2 seals. I'm guessing the straight one pulls right out but was wandering about the other one?

Here is a popular thread showing the rebuild process. It should answer a lot of questions. Also, look at the 60-60 FAQ Index for answers to many questions about these trucks.

All times are GMT -4. The time now is 06:24 AM.