The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 327 what flywheel and clutch? (https://67-72chevytrucks.com/vboard/showthread.php?t=688745)

scuderia

11-16-2015 12:49 PM

327 what flywheel and clutch?

Collecting all the parts to swap from my current 292 to a large journal 327. I just read that the flywheel on the 292 is different than the small block V8's. What flywheel and clutch should I be looking for? I'm going to keep the SM465. Also any potential issues with the bell housing I currently have? Thanks

jtrichard

11-16-2015 01:18 PM

Re: 327 what flywheel and clutch?

Bell housing will bolt right on as for the flywheel every thing I read says it will also fit as long as yours is a "292" smaller 6s had smaller bolts and will fit the 327 if you drill them out.... as for the clutch if yours is 11" then it will also be fine

Chevy Fleetside

11-16-2015 01:49 PM

Re: 327 what flywheel and clutch?

http://www.summitracing.com/parts/pi...et?prefilter=1

scuderia

11-16-2015 02:15 PM

Re: 327 what flywheel and clutch?

Quote:

Originally Posted by Chevy Fleetside (Post 7378175)

http://www.summitracing.com/parts/pi...et?prefilter=1

Thanks! and that'll work with the starter I have?

Chevy Fleetside

11-16-2015 07:27 PM

Re: 327 what flywheel and clutch?

Quote:

Originally Posted by scuderia (Post 7378207)

Thanks! and that'll work with the starter I have?

You could count the teeth on the flywheel you have now. If you have 168 then it will work.

All times are GMT -4. The time now is 07:47 AM.