67/68 hood, fenders, grille, 68-72 bed sides
 

NOTE: For those asking me to hold parts for pickup at a later time or for shipping arrangements to be determined, I'd prefer to be paid up front so I'm not in jeopardy of missing someone local who wants them now, w/o shipping. I'm happy to accommodate shipping arrangements by you and to hold them for any length of time, but not at the expense of keeping someone else away from getting the parts. Not trying to be hard to deal with, just trying to be fair. Thanks!


I've got a few parts left from a build I was considering. I'm turning my focus to my '73 and would like to move these along. Would rather not ship since they are large items but will be glad to drive to meet a good distance. For reference, these parts are located in Cedartown, GA at my parents shop.

They are all some of the better parts I've seen to start a build. All with minimal, if any, rust through and relatively straight. I'll point out the worst area or thing about a part above the description.

67/68 grille with trim inserts. Pretty nice shape with no major dents or dings except for one spot on the lower bar under driver's turn signal and a small impression on the bottom insert by passenger's signal. SOLD

http://i1300.photobucket.com/albums/...ps1izrwpbf.jpg

68 fenders. I'm told they're off a NM truck. Been blasted and primed. Very straight with a few pin holes in the lower cups. $250 for pair - SOLD to MS2335

67/68 hood. Pretty straight hood with a little rust through at the driver side lip. $100 - SOLD to nlped

68-72 bed sides (off a 71 GA truck) very straight and rust free bed sides with the exception of some pretty shotty body filler on the driver's side at the bottom behind wheel well. $550 - SOLD to blap

http://i1300.photobucket.com/albums/...psbhf1yl7n.jpg
http://i1300.photobucket.com/albums/...psfidgz6o0.jpg
http://i1300.photobucket.com/albums/...psyrmvutsf.jpg
http://i1300.photobucket.com/albums/...pszts4k1r5.jpg
http://i1300.photobucket.com/albums/...psuqu686rd.jpg
http://i1300.photobucket.com/albums/...pses6x3yom.jpg
http://i1300.photobucket.com/albums/...ps8cylubvd.jpg
http://i1300.photobucket.com/albums/...psz1qvt5ih.jpg
http://i1300.photobucket.com/albums/...psqrvbpw4r.jpg
http://i1300.photobucket.com/albums/...psobe5utyz.jpg
http://i1300.photobucket.com/albums/...psdh4c0inb.jpg
http://i1300.photobucket.com/albums/...ps0jbbhaw1.jpg
http://i1300.photobucket.com/albums/...psownkim29.jpg
http://i1300.photobucket.com/albums/...pszjof5s6j.jpg
http://i1300.photobucket.com/albums/...psq0spi5va.jpg

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Would be in on the bed sides if you would consider shipping ? greyhound maybe?

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

can ya post a pic of the rust area on the hood ?
Thanks

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I'm interested in the front inner fender wells in the trailer if they are for sale. Could drive to meet you. Pics and price?

Thanks
Jim

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I'm going to have to get some more close-up pics. As I mentioned, the parts are at my parents and they're out of town and I'm tied up over the next few days.

At this point, I'd rather see if someone local is interested. If I decide to ship, you're first in line, blap.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Sorry, Jim. I actually sold those to another board member day before yesterday.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

If you were local, the bedsides would be sold today :)

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I d be willing to set up a pick up via uship they can come right to your shop.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I will take the fenders but will be a couple of weeks before I can get there
Posted via Mobile Device

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Hmmm. Let me do some calendar checking. Subscribed.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I'll take the hood.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

If you're willing to do that, I'd be glad to accommodate. You're currently in line for the bedsides. Please PM me to discuss further.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

That's fine. They're yours. Please PM me to discuss further.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

It's yours. PM me to discuss further.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I'll get in line for bedsides.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

You're next in line behind blap.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

PM sent...

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

PM replied.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Payment sent for the hood :metal:

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Received. Thank you!

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Really need the driver side hinge area... do you have a door this can be cut off of?

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

I don't. I've actually sold all my doors.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Ok, thanks anyway... the search continues....

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Bed sides sold to blap and being picked up in the next hour. A great guy to deal with. Thank you, blap.

Still have the grille available. TTT.

Re: 67/68 hood, fenders, grille, 68-72 bed sides
 

Would you be intrested in shipping the grille to 37618?and if so how much?