GA 67/68 hood, fenders, grille, 68-72 bed sides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GAc10boy** · 11-27-2015, 10:05 AM

NOTE: For those asking me to hold parts for pickup at a later time or for shipping arrangements to be determined, I'd prefer to be paid up front so I'm not in jeopardy of missing someone local who wants them now, w/o shipping. I'm happy to accommodate shipping arrangements by you and to hold them for any length of time, but not at the expense of keeping someone else away from getting the parts. Not trying to be hard to deal with, just trying to be fair. Thanks!

I've got a few parts left from a build I was considering. I'm turning my focus to my '73 and would like to move these along. Would rather not ship since they are large items but will be glad to drive to meet a good distance. For reference, these parts are located in Cedartown, GA at my parents shop.

They are all some of the better parts I've seen to start a build. All with minimal, if any, rust through and relatively straight. I'll point out the worst area or thing about a part above the description.

67/68 grille with trim inserts. Pretty nice shape with no major dents or dings except for one spot on the lower bar under driver's turn signal and a small impression on the bottom insert by passenger's signal. SOLD

68 fenders. I'm told they're off a NM truck. Been blasted and primed. Very straight with a few pin holes in the lower cups. $250 for pair - SOLD to MS2335

67/68 hood. Pretty straight hood with a little rust through at the driver side lip. $100 - SOLD to nlped

68-72 bed sides (off a 71 GA truck) very straight and rust free bed sides with the exception of some pretty shotty body filler on the driver's side at the bottom behind wheel well. $550 - SOLD to blap

blap · 11-27-2015, 10:20 AM

Would be in on the bed sides if you would consider shipping ? greyhound maybe?

blap · 11-27-2015, 10:30 AM

can ya post a pic of the rust area on the hood ?
Thanks

**JimH2828** · 11-27-2015, 10:45 AM

I'm interested in the front inner fender wells in the trailer if they are for sale. Could drive to meet you. Pics and price?

Thanks
Jim

**GAc10boy** · 11-27-2015, 10:48 AM

I'm going to have to get some more close-up pics. As I mentioned, the parts are at my parents and they're out of town and I'm tied up over the next few days.

At this point, I'd rather see if someone local is interested. If I decide to ship, you're first in line, blap.

**GAc10boy** · 11-27-2015, 10:49 AM

Quote:

Originally Posted by JimH2828

I'm interested in the front inner fender wells in the trailer if they are for sale. Could drive to meet you. Pics and price?

Thanks
Jim

Sorry, Jim. I actually sold those to another board member day before yesterday.

FlameOut · 11-27-2015, 12:38 PM

If you were local, the bedsides would be sold today

blap · 11-27-2015, 01:06 PM

I d be willing to set up a pick up via uship they can come right to your shop.

**ms2335** · 11-27-2015, 01:06 PM

I will take the fenders but will be a couple of weeks before I can get there
Posted via Mobile Device

BMERDOC · 11-27-2015, 01:23 PM

Hmmm. Let me do some calendar checking. Subscribed.

**nlped** · 11-27-2015, 01:30 PM

I'll take the hood.

**GAc10boy** · 11-27-2015, 01:33 PM

Quote:

Originally Posted by blap

I d be willing to set up a pick up via uship they can come right to your shop.

If you're willing to do that, I'd be glad to accommodate. You're currently in line for the bedsides. Please PM me to discuss further.

**GAc10boy** · 11-27-2015, 01:36 PM

Quote:

Originally Posted by ms2335

I will take the fenders but will be a couple of weeks before I can get there
Posted via Mobile Device

That's fine. They're yours. Please PM me to discuss further.

**GAc10boy** · 11-27-2015, 01:37 PM

Quote:

Originally Posted by nlped

I'll take the hood.

It's yours. PM me to discuss further.

**uncle** · 11-27-2015, 01:48 PM

I'll get in line for bedsides.

**GAc10boy** · 11-27-2015, 02:17 PM

Quote:

Originally Posted by uncle

I'll get in line for bedsides.

You're next in line behind blap.

**nlped** · 11-27-2015, 02:26 PM

Quote:

Originally Posted by GAc10boy

It's yours. PM me to discuss further.

PM sent...

**GAc10boy** · 11-27-2015, 02:53 PM

Quote:

Originally Posted by nlped

PM sent...

PM replied.

**nlped** · 11-27-2015, 03:04 PM

Payment sent for the hood

**GAc10boy** · 11-27-2015, 03:28 PM

Quote:

Originally Posted by nlped

Payment sent for the hood

Received. Thank you!

Possmguts · 11-28-2015, 10:26 PM

Really need the driver side hinge area... do you have a door this can be cut off of?

**GAc10boy** · 11-29-2015, 12:44 PM

Quote:

Originally Posted by Possmguts

Really need the driver side hinge area... do you have a door this can be cut off of?

I don't. I've actually sold all my doors.

Possmguts · 12-02-2015, 08:35 PM

Quote:

Originally Posted by GAc10boy

I don't. I've actually sold all my doors.

Ok, thanks anyway... the search continues....

**GAc10boy** · 12-02-2015, 10:20 PM

Bed sides sold to blap and being picked up in the next hour. A great guy to deal with. Thank you, blap.

Still have the grille available. TTT.

druzzy · 12-03-2015, 03:00 PM

Would you be intrested in shipping the grille to 37618?and if so how much?

11-27-2015, 10:05 AM	#1
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	67/68 hood, fenders, grille, 68-72 bed sides NOTE: For those asking me to hold parts for pickup at a later time or for shipping arrangements to be determined, I'd prefer to be paid up front so I'm not in jeopardy of missing someone local who wants them now, w/o shipping. I'm happy to accommodate shipping arrangements by you and to hold them for any length of time, but not at the expense of keeping someone else away from getting the parts. Not trying to be hard to deal with, just trying to be fair. Thanks! I've got a few parts left from a build I was considering. I'm turning my focus to my '73 and would like to move these along. Would rather not ship since they are large items but will be glad to drive to meet a good distance. For reference, these parts are located in Cedartown, GA at my parents shop. They are all some of the better parts I've seen to start a build. All with minimal, if any, rust through and relatively straight. I'll point out the worst area or thing about a part above the description. 67/68 grille with trim inserts. Pretty nice shape with no major dents or dings except for one spot on the lower bar under driver's turn signal and a small impression on the bottom insert by passenger's signal. SOLD 68 fenders. I'm told they're off a NM truck. Been blasted and primed. Very straight with a few pin holes in the lower cups. $250 for pair - SOLD to MS2335 67/68 hood. Pretty straight hood with a little rust through at the driver side lip. $100 - SOLD to nlped 68-72 bed sides (off a 71 GA truck) very straight and rust free bed sides with the exception of some pretty shotty body filler on the driver's side at the bottom behind wheel well. $550 - SOLD to blap __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build Last edited by GAc10boy; 10-04-2016 at 01:44 PM.

11-27-2015, 10:20 AM	#2
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 67/68 hood, fenders, grille, 68-72 bed sides Would be in on the bed sides if you would consider shipping ? greyhound maybe?

11-27-2015, 10:30 AM	#3
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 67/68 hood, fenders, grille, 68-72 bed sides can ya post a pic of the rust area on the hood ? Thanks

11-27-2015, 10:45 AM	#4
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 67/68 hood, fenders, grille, 68-72 bed sides I'm interested in the front inner fender wells in the trailer if they are for sale. Could drive to meet you. Pics and price? Thanks Jim

11-27-2015, 10:48 AM	#5
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 67/68 hood, fenders, grille, 68-72 bed sides I'm going to have to get some more close-up pics. As I mentioned, the parts are at my parents and they're out of town and I'm tied up over the next few days. At this point, I'd rather see if someone local is interested. If I decide to ship, you're first in line, blap. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

11-27-2015, 12:38 PM	#7
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: 67/68 hood, fenders, grille, 68-72 bed sides If you were local, the bedsides would be sold today __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

11-27-2015, 01:06 PM	#8
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 67/68 hood, fenders, grille, 68-72 bed sides I d be willing to set up a pick up via uship they can come right to your shop.

11-27-2015, 01:06 PM	#9
ms2335 Senior Member Join Date: Jan 2009 Location: glenmora. la Posts: 290	Re: 67/68 hood, fenders, grille, 68-72 bed sides I will take the fenders but will be a couple of weeks before I can get there Posted via Mobile Device

11-27-2015, 01:23 PM	#10
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: 67/68 hood, fenders, grille, 68-72 bed sides Hmmm. Let me do some calendar checking. Subscribed. __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

11-27-2015, 01:30 PM	#11
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 67/68 hood, fenders, grille, 68-72 bed sides I'll take the hood. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-27-2015, 01:48 PM	#15
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 67/68 hood, fenders, grille, 68-72 bed sides I'll get in line for bedsides.

11-27-2015, 03:04 PM	#19
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 67/68 hood, fenders, grille, 68-72 bed sides Payment sent for the hood __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-28-2015, 10:26 PM	#21
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: 67/68 hood, fenders, grille, 68-72 bed sides Really need the driver side hinge area... do you have a door this can be cut off of? __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-02-2015, 10:20 PM	#24
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 67/68 hood, fenders, grille, 68-72 bed sides Bed sides sold to blap and being picked up in the next hour. A great guy to deal with. Thank you, blap. Still have the grille available. TTT. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

12-03-2015, 03:00 PM	#25
druzzy Registered User Join Date: Dec 2013 Location: bluff city tn Posts: 12	Re: 67/68 hood, fenders, grille, 68-72 bed sides Would you be intrested in shipping the grille to 37618?and if so how much?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.