The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - KS 292 carb. (https://67-72chevytrucks.com/vboard/showthread.php?t=694592)

Wrenchbender Ret

01-13-2016 05:02 PM

292 carb.

3 Attachment(s)

I have a carburetor from an 81 292 engine. It has the electric choke so it can be used on any manifold without divorced coil & linkage. The vacuum pulloff works & the heater coil works. as does the idle selinoid. It should have a kit put in before use as it has been setting for a long time. This carb has a larger bore & venturi then the 250. It has no rust or corrosion. $50 plus $15 shipping.
George
SOLD

daveklein

01-19-2016 10:17 AM

Re: 292 carb.

I sent you a PM.....Dave

Wrenchbender Ret

01-19-2016 04:50 PM

Re: 292 carb.

I replied.
George

RickDeVon

01-19-2016 09:45 PM

Re: 292 carb.

1 Attachment(s)

Can I replace my stock carb on my 250 with this???

Wrenchbender Ret

01-19-2016 11:26 PM

Re: 292 carb.

It will fit good but I'm not sure how it will run. It has larger throat & venturies then the 250. Dave has first pick at it.
George

All times are GMT -4. The time now is 08:18 AM.