The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Rear brake lines help needed. (https://67-72chevytrucks.com/vboard/showthread.php?t=696124)

1moretoy 01-28-2016 12:54 AM

Rear brake lines help needed.
 
Hey guys its been a while since I took the rear lines apart. I'm looking for any pictures of how the factory transitioned from the frame to the rear end housing on a 70 short fleet. I'm also looking for a 3/16 brake tee that has a mounting tab attached so I can attach it to the rear end housing. Any help is appreciated.

Thank you,

1moretoy 01-29-2016 07:09 PM

Re: Rear brake lines help needed.
 
Anyone?

Redline novdog 01-29-2016 07:13 PM

Re: Rear brake lines help needed.
 
I could go snap a pic of my '67 if that would help?

1moretoy 01-29-2016 09:49 PM

Re: Rear brake lines help needed.
 
Quote:

Originally Posted by Redline novdog (Post 7466323)
I could go snap a pic of my '67 if that would help?

That would be great if you could.

Redline novdog 01-30-2016 11:38 AM

Re: Rear brake lines help needed.
 
5 Attachment(s)
Attachment 1493504

Attachment 1493505

Attachment 1493506

Attachment 1493507

Attachment 1493508
Hopefully this helps. I don't know if this is the same on a '70. The brake line runs down the passenger side?! Guess I need to get under my truck more LOL!

70STOVEBOLT 01-30-2016 11:58 AM

Re: Rear brake lines help needed.
 
I can get some pics of my 70 SWB but it will be tomorrow.

RodnRudy 01-30-2016 12:01 PM

Re: Rear brake lines help needed.
 
3 Attachment(s)
Here are three pics for you. The rusty one is my 68 rear end, should be the same as yours, the other clean one is for a 71, its the one I'm using, they both terminate on the right side cross member shown in the last pic.
The 68 utilizes a brass block that clamps to a bracket welded to the axle housing. The rubber flex line screws into that block and goes up to the tab on the cross member.
Th 71 uses a block that has the rubber line crimped to it and fastens to the tab on the axle housing with a 5/16 bolt. It terminates like the 68 at the frame cross member. Hope this helps and if you need the 68 brass block, PM me and I'll send it to you for mailing costs

1moretoy 01-30-2016 12:40 PM

Re: Rear brake lines help needed.
 
Thank you guys for taking the time to take pictures for me. This is why I love this site, everyone is willing to lend a hand.


All times are GMT -4. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com