67-72 fleetside rear bumper on our trucks.
 

Ive seen a few pictures of this and was hoping someone could post more pictures and possible the install and what they had to do to make brackets for it. I am really liking the way these look.


Thanks in advance guys!

Aaron

Re: 67-72 fleetside rear bumper on our trucks.
 

Just use the 67-72 fleetside brackets that go with the bumper and it will bolt right up.

Re: 67-72 fleetside rear bumper on our trucks.
 

I just did this and what MisterC said is spot on.
See my post earlier today

Re: 67-72 fleetside rear bumper on our trucks.
 

Fits perfect, and looks like it was made for our trucks. Great mod.

Re: 67-72 fleetside rear bumper on our trucks.
 

Kinda hard when im using a 62 frame. I guess I should have stated that.

Re: 67-72 fleetside rear bumper on our trucks.
 

60-62 frames are 8" wider than 63-72, im not sure how you can do that other than some serious fab. Good luck!

Re: 67-72 fleetside rear bumper on our trucks.
 

I had the 60-62 brackets for a stock bumper. After several bad looking chrome bumpers I swapped over to the 67-72. I cut the bracket to fit. Some flat stock would work just the same. If a welder is not available find something prebent that can cut.