dodge d60 axle swap?
 

Buddy of mine has a d60 from a dodge for a cheap price. anyone ever swap or have any info on swapping to k10

Re: dodge d60 axle swap?
 

Front or Rear?

Re: dodge d60 axle swap?
 

If its from a leaf spring truck you can use the front axle.You will need these http://offroaddesign.com/catalog/Dod...apBushings.htm and i believe the lugs are a different size them a gm truck uses.

Re: dodge d60 axle swap?
 

front.

Re: dodge d60 axle swap?
 

heres some pics
Attachment 1500773

Attachment 1500774

Attachment 1500775

Re: dodge d60 axle swap?
 

and heres a 14ff i might be getting. looks good for $250. and it already has 4.10 gears.

Attachment 1500782

Attachment 1500783

Attachment 1500784

Attachment 1500785

Attachment 1500786

Re: dodge d60 axle swap?
 

250 a good price for a 14ff?

Re: dodge d60 axle swap?
 

Looks like that axles got new fluid in it. I hope he sealed it back up though...

Re: dodge d60 axle swap?
 

im going to check it out tomorrow

Re: dodge d60 axle swap?
 

dont know about that d 60 guy want 500 for it and it look kinda rough. it has 355 gears welded and need new brake parts as you can see

Re: dodge d60 axle swap?
 

To me and around here 250 seems steep for a 14ff with open diff but I'm sure location matters. I'd love to get that for mine once I swap the locked 373 in.

Re: dodge d60 axle swap?
 

That D60 probably has the spring perches spaced different than a Chevy, not sure though. I see 3/4 ton axles for sale pretty cheap from time to time but $250 isn't bad.

Re: dodge d60 axle swap?
 

It's only a 1/2 inch different. Easy to overcome if using lift springs, you can get 1/4 inch offset bushings just for that purpose. The Dodge axle has many minor differences, but it's still basically a direct swap into a GM truck.

Re: dodge d60 axle swap?
 

if the spring perches are different, which i assumed were. ill just relocate and weld new ones in

Re: dodge d60 axle swap?
 

The off road design spring bushings i linked you to fix the spring width problem.

Re: dodge d60 axle swap?
 

So it's a half inch farther out or in? I seen a few come up recently, and honestly that's awesome!

Re: dodge d60 axle swap?
 

Geezus $250 for a 14bolt FF?! That is a steal for where I am from.

Re: dodge d60 axle swap?
 

I guess it all depends on where you are. I see stock 14FFs for less than that all the time.

As with old trucks, I imagine I could make a fair amount of money by buying them here and shipping them to rusty areas. I wouldn't feel as bad doing it with parts as clean trucks, though.

Re: dodge d60 axle swap?
 

A lot of folks have just pulled the springs together with a ratchet strap and bolted the thing right in. It seems like hack, but it does work fine.

But like was mentioned before, if using narrower aftermarket springs, just use offset bushings or space with washers.

Re: dodge d60 axle swap?
 

I think you are OK price wise, especially since the 60 has single wheel hubs.

I saw your hood ad of FB, I'll have to ask you about the big block parts sometime.

Re: dodge d60 axle swap?
 

USSKOVAL I thought of that, but since I have 52" Springs up front I have spacers on either side, so I think that'll work out good...

Re: dodge d60 axle swap?
 

The Dodge D60 will work. I've done it and it is simple.

Be prepared to change out the shock mounts.

You have to be a tad creative with the brake lines.

I recall grinding a tad on the side of leaf springs to get the u-bolts by easier.

After doing it once, in the future I would just get the right Chevy axle to begin with.

Re: dodge d60 axle swap?
 

Yeah, you are set with 52's, you have room for adjustment.