The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Rear axle codes and help (https://67-72chevytrucks.com/vboard/showthread.php?t=699316)

70 c10 rook 02-28-2016 09:12 PM

Rear axle codes and help
 
So I'm converting my 70 from 6 to 5, and I have this code on the rear axle TDE 0522K that is on the pass. Axle tube on the pass. Side yolk I have 3896838 and on the driver side yolk there is GM10. I have done some reader has and found out that most likely has 3.07 gears. Are these any good will they get up some speed I'm going to keep my 350 4 barrel pretty much stock. Can anyone give me some input on this I will eventually have 18x8 and 18x 10 tires and wheels. Thanks for your help

LockDoc 02-28-2016 09:55 PM

Re: Rear axle codes and help
 
Quote:

Originally Posted by 70 c10 rook (Post 7502976)
So I'm converting my 70 from 6 to 5, and I have this code on the rear axle TDE 0522K that is on the pass. Axle tube on the pass. Side yolk I have 3896838 and on the driver side yolk there is GM10. I have done some reader has and found out that most likely has 3.07 gears. Are these any good will they get up some speed I'm going to keep my 350 4 barrel pretty much stock. Can anyone give me some input on this I will eventually have 18x8 and 18x 10 tires and wheels. Thanks for your help


3.07 would be correct. All you need is the "TDE". Here is a link to the ratio charts I posted a few years ago. The 3.07 is a pretty high gear but it should work pretty good with your current setup, presuming you have a TH350.... Not sure when you go with the 18" wheels though, you may not have any low end left at that time.

http://67-72chevytrucks.com/vboard/s...d.php?t=578793

LockDoc

70 c10 rook 02-28-2016 10:43 PM

Re: Rear axle codes and help
 
Does the 0522K or the other two numbers mean anything,and yes it does have a th350

LockDoc 02-28-2016 10:49 PM

Re: Rear axle codes and help
 
Quote:

Originally Posted by 70 c10 rook (Post 7503128)
Does the 0522K or the other two numbers mean anything,and yes it does have a th350


I think the 0522k may be a date code & the 3896838 should be a part number. I don't know what the GM10 is for.

LockDoc


All times are GMT -4. The time now is 07:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com