|
Ever seen a bolt like this?
1 Attachment(s)
This came out of a 1968 C20 4spd transmission side cover. The threads would not come clean with a wire brush so I got a small screw driver and picked it clean. The residue in this area was brown/black, fairly tough, and fibrous. When cleaned, it showed this notch machined into the threads. All 12 bolts were the same. I'm guessing they pressed in a piece of plastic or fiber to keep the bolt from loosening; maybe it helped seal the hole as well. I've not run across this before. It must have been a fairly expensive solution.
|
Re: Ever seen a bolt like this?
Appears to be some sort of lock bolt like a nylon lock nut. Never seen one before.
|
Re: Ever seen a bolt like this?
I haven't seen any of those for years, so yes I've seen them before
|
Re: Ever seen a bolt like this?
They still make bolts like that although they aren't that common.
|
| All times are GMT -4. The time now is 03:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com