spicer pto
 

Good evening gents
I have a 1966 c20 4spd sm420 I think. It has been a farm dump bed since new. The cover plate on the side of the tranny needs a new gasket and seal for the pto shaft. Does anyone have the part numbers? The local auto parts stores will probably not know what i am talking about. Thanks, Lowell

Re: spicer pto
 

Novack, or you can make your own gasket from material at your local auto parts store. You can also use silicone .

Re: spicer pto
 

All Fel-Pro numbers

55380 standard six bolt mounting gasket
55372 .020" thickness, used for shimming
55379 .010" thickness, used for shimming

I never had to use the shim gaskets on anything I've worked on, but I guess it depends on the application.

Re: spicer pto
 

If you needed a shim, shouldn't there already be one installed that you could reuse?

Thank you for the part numbers, that is the only thing that leaks on my old truck.

Re: spicer pto
 

No problem. I'm not too sure, but I was told that's what those two part numbers are for. I looked on Google and it just calls them PTO gaskets.

Re: spicer pto
 

Thanks for the info ! Anybody have the number of the shaft seal?

Re: spicer pto
 

You're welcome, what's the model number on the PTO?