The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Temp gauge wire routing (https://67-72chevytrucks.com/vboard/showthread.php?t=707040)

DANTIP

05-14-2016 07:25 PM

Temp gauge wire routing

What is the correct/best routing of the green/insulated temp sensor wire from the firewall to the terminal? Photos may help! Thx

FirstOwner69

05-14-2016 08:51 PM

Re: Temp gauge wire routing

3 Attachment(s)

The original routing was in a fabric loom along the valley formed by the left valve cover and intake manifold. My original 350 left valve cover had a couple retainer clips for attachment. At the front, it dropped down to a clip retained by the bottom water pump bolt/stud then back and up to the temperature sensor.The pictures below show the routing. In the second picture the bolt/stud is in the wrong (top) hole.

EDIT: Added 3rd pic.

All times are GMT -4. The time now is 10:36 AM.