![]() |
WTB Cowl to Vent Door Spring
1 Attachment(s)
I need the spring that comes on A/C trucks that goes from the cowl to the vent door.
|
Re: WTB Cowl to Vent Door Spring
Quote:
If it is the one for the vent door in the kick panel I have that one too I believe. Let me know. Jay |
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Bump
|
Re: WTB Cowl to Vent Door Spring
I'm pretty sure I have one. I'm traveling but when I get home l'll check and let you know.
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Well, turns out, I didn't have one. Sorry. Hope you find what you need.
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
I just bought a bunch of parts from a 1972 C10 that a guy parted out. It had A/C and I think when he showed me the boxes of loose parts that I might have seen one in there. I didn't post sooner because I thought you had one located - wanted to give other person first shot.
Also, it would be "bragging rights"?? to be able to claim I sold two springs to people in Canada. hahaha |
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Quote:
:waah::waah: I will always wish for what might have been!! :waah: I looked through the boxes and couldn't find the spring you are looking for - some others, but not the correct one. Sorry. Jay |
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Bump
|
Re: WTB Cowl to Vent Door Spring
Maybe a hit here Greg? I will likely need one or two myself: http://www.thespringstore.com
|
Re: WTB Cowl to Vent Door Spring
Quote:
|
Re: WTB Cowl to Vent Door Spring
Quote:
Hmmm... I still have the one in Greg's picture but it's in use in my truck. I think I also have my original somewhere, but one of the hooks broke off. I bent the broken end to work. I also have another, but it is broken in the coil portion. I may be able to use the 2 broken ones and the additional pictures in my file to spec out a suitable replacement. It'll probably take some time though. I've thought about having some reproduced. Maybe the place in your link would be a less costly alternative. The toughest part would be determining the "spring rate". I wonder how big the market here would be. Jim |
Re: WTB Cowl to Vent Door Spring
This place is 16 miles from me. Maybe I should pay them a visit!
Jim |
Re: WTB Cowl to Vent Door Spring
|
Re: WTB Cowl to Vent Door Spring
1 Attachment(s)
A form member sent me one earlier this year. It was a little rusty but looked ok, well when I went to pull it to install it the hook broke off. Found one at lowes that works. Not quite as thick of wire but it does the job.
Keith |
Re: WTB Cowl to Vent Door Spring
1 Attachment(s)
I bought a variety pack at NAPA for about 5 bucks, I was able to make one work. If it doesn't have to be a GM this worked pretty well.
|
Re: WTB Cowl to Vent Door Spring
Thanks for the tips. I'l try Lowes and Napa here but know they don't always carry the same things as the stores in the USA.
This place is 16 miles from me. Maybe I should pay them a visit! Jim Jim if you go the the last and they can't help you with spring maybe you could get plant tour and that would be interesting to see how springs are made. |
Re: WTB Cowl to Vent Door Spring
If you go the NAPA route and your's does not carry them, let me know and I will pick a pack up for you.
|
All times are GMT -4. The time now is 05:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com