1971/72 front disk brake exploded view
 

After hours of searching on here and the web I can't seem to find an exploded view of the 71-72 front disk brake assembly. My project is utilizing a factory 71-72 stock height spindle and therefore I wanted to keep the brake components from the same year range. However, I can't find a factory exploded view or parts list that has all the nuts and bolts included. The following is what I can come up with from memory:

-dust shield (no idea what the bolt size and pitch is to attach them to the spindle)
-rotor
-caliper w/pads
-caliper bolts
-inner seal
-inner bearing
-outer bearing
-thrust washer
-castle nut
-cotter pin for castle nut
-dust cap

I wanted to verify what I came up with from memory to an exploded view. Anything I left out? I know there are kits out there where you can but all the components but I wanted to see if I could piece it together for cheaper, plus I already have the spindles.

Thanks

Re: 1971/72 front disk brake exploded view
 

I believe the dust shield bolt size is 5/16" - 18 X 7/8"

Re: 1971/72 front disk brake exploded view
 

Have you checked out an Assembly Manual? Don’t have one handy or I’d look it up. I would think the Service Manual would also have a good image, maybe not exploded though.

Re: 1971/72 front disk brake exploded view
 

Does this help?
http://67-72chevytrucks.com/vboard/s....php?p=5781194