napco 4x4 axle parts c-60
 

I have a set of napco axles from a 67-72 body style c-60 . there 5/10 lug with the 8.25-20 tires .

looking to fresh them up with possible brake parts and I know seals and gaskets .

were is a good place to dig up 4x4 front axle stuff for these ?

cast in the housing long side tube is napco 38508 if I read it correctly .

also might be needing for t-case gaskets and seals . maybe some small parts . any info on these ? have not found a tag on it yet . it has a parking brake on the back side . and twin shifter stick for high/low and front in/out.

can and will post pics Monday .

Re: napco 4x4 axle parts c-60
 

looks like a Rockwell t223 tcase from searching and info with pics I have found.

it also has a ramsey pto unit out the top on back .

Re: napco 4x4 axle parts c-60
 

Gaskets can be made and, usually, seals can be matched up. Not sure where to get started looking for parts, other than truck axle/bearing service supplier. In Baltimore I would check with a place called Trans Axle.
https://www.google.com/url?sa=t&rct=...naAGU_ek3CfTsg

Re: napco 4x4 axle parts c-60
 

few pics of parts