Please help... '60 C10, LS1 - need gas tank
 

I'm working on building a C10 with porterbuilt setup and LS1 motor. I need to get a gas tank for the rear. It seems my options are limited for this year model, several to choose from for '63-'66. I don't think I can run the '63-'66 due to the frame size. Right now it seems my best option is the EFI Boyd tank. They are pricey, but I've heard good things about them.

Before I pull the trigger, does anyone have any other recommendations?

Thanks
Heath

Re: Please help... '60 C10, LS1 - need gas tank
 

I'm thinking they are out there: https://www.performanceonline.com/19...ank-19-Gallon/

Re: Please help... '60 C10, LS1 - need gas tank
 

Yes, that is one of the few that I've found. By the time you add the fuel pump, etc. it's up their around the same price range as the boyd tanks.

Hoping for something a little cheaper...

Thanks for your response.

Re: Please help... '60 C10, LS1 - need gas tank
 

On my Ls S10 I have a 16 gal fuel cell with a Speedway external fuel pump and regulator. I've put 30,000 miles on it without any problems. When I do my 64 I'm going to put a 19 gal Mustang Tank on it. Might use external Pump again.

Re: Please help... '60 C10, LS1 - need gas tank
 

Tanks Inc.com has mustang regular and extra capacity tanks that fit 60-62 frames. Check faq section for those who installed.

Re: Please help... '60 C10, LS1 - need gas tank
 

Thanks. Looked through FAQ. Must have missed that.