|
1967 C20 Flatbed Driver Project
5 Attachment(s)
We have had this truck since May and have slowly been working on getting it to be a driver.
I will start with some pics of when we got it. |
Re: 1967 C20 Flatbed Driver Project
4 Attachment(s)
Pics
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Pics 2
|
Re: 1967 C20 Flatbed Driver Project
1 Attachment(s)
First thing we had to do was get rid of the camper. Four pickup loads of garbage and one load scrap aluminum later.
|
Re: 1967 C20 Flatbed Driver Project
In
|
Re: 1967 C20 Flatbed Driver Project
1 Attachment(s)
Then we had to cut 30" out of the frame to get back down to the 127" wheelbase. We also cut a couple feet off the back of the frame.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Then we were at the junk yard getting some other parts and walked by a 71 dump and noticed it was a small window. We cut the section out and here are some pics of it welded in, the start of body work and some primer.
|
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
Pics
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
And some paint!!
|
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
And a new sliding rear window.
|
Re: 1967 C20 Flatbed Driver Project
And that is where we are now. I will post some more pics soon. We still need to put a passenger rocker on it, Install the gas tank and a few more things but getting close to being a driver.
|
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
Here are some pics of the new seat cover from LMC.
|
Re: 1967 C20 Flatbed Driver Project
1 Attachment(s)
Today we bolted the bed on and welded the bumper on.
Also installed the tail lights and wired them up. |
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
And some more pictures I took today.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
We had these tool boxes in the garage for a while with the thought of using them for tool storage and they happened to be the right size.
|
Re: 1967 C20 Flatbed Driver Project
following
|
Re: 1967 C20 Flatbed Driver Project
Looks great so far. I assume the trucks going to go to work now.
|
Re: 1967 C20 Flatbed Driver Project
Quote:
|
Re: 1967 C20 Flatbed Driver Project
3 Attachment(s)
Picked up a 62 gmc with a newer flatbed and decided it would look nicer on the 67
Going to clean it up, paint it and install the tool boxes. |
Re: 1967 C20 Flatbed Driver Project
Love it, nice work :mm:
|
Re: 1967 C20 Flatbed Driver Project
Quote:
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Wire wheeled the bed, got it prepped and painted. Will post some finished pics tomorrow.
|
Re: 1967 C20 Flatbed Driver Project
5 Attachment(s)
Pics of painted bed.
|
Re: 1967 C20 Flatbed Driver Project
That Flat bed looks Awesome!!!
I like that rear sliding window. This is Probably the direction I will go with my Truck. I have a C30 157 WB with a small back glass. |
Re: 1967 C20 Flatbed Driver Project
Quote:
|
| All times are GMT -4. The time now is 08:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com