Has Any One Used This Door Adj Tool
 

Has Any One Used This Door Adj Tool ?? If So How Do You Use It ??? Please Let Me Know
Did Not Come With Instructions
Thanks
Harley03joe :smoke: :smoke: :smoke:

http://i259.photobucket.com/albums/h...03joe/0016.jpg

http://i259.photobucket.com/albums/h...e/CIMG9689.jpg

Re: Has Any One Used This Door Adj Tool
 

Yep, works pretty darn good

Re: Has Any One Used This Door Adj Tool
 

Sorry I just noticed you asked about HOW to use it. It's pretty simple, if you look at the pic that LMC has, the C-opening goes on the striker. The other end, the little rod goes into your latch. Then use a breaker bar on the 1/2" bolt part that right there beside the rod that goes into the latch. And then go up or down with the breaker bar, which ever way you need to adjust your door.
Now first, make sure you have a bushing on the striker. That being missing, will make your door feels like its out of adjustment. And then protect your paint on the door jamb where that adjust tool will be, just in case.

Re: Has Any One Used This Door Adj Tool
 

At the auto manufacturing plant, where I work, the weld adjust guys use this one. You can get really good leverage with it.

http://www.tooltopia.com/tool-aid-82...da3hoCYXnw_wcB

Re: Has Any One Used This Door Adj Tool
 

http://www.top-downsolutions.com/ima...50-500x500.jpg


http://www.top-downsolutions.com/ez-...alignment-tool


Instructions above on website...


I have the steck version, but the same exact tool

Re: Has Any One Used This Door Adj Tool
 

I Want To Thank You Folks For Your Instructions, Very Nice To See Coming From The Chevy Truck Family.
Happy New Year To All
And
Thank You All
Harley03joe :smoke: :smoke: :smoke:
http://i259.photobucket.com/albums/h...ley03joe/3.jpg

http://i259.photobucket.com/albums/h...e/CIMG9682.jpg

P.S. I Got My Running Boards On And Put In LED Head Lights :smoke:
http://i259.photobucket.com/albums/h...e/CIMG9690.jpg

http://i259.photobucket.com/albums/h...e/CIMG9691.jpg

http://i259.photobucket.com/albums/h...e/CIMG9693.jpg

http://i259.photobucket.com/albums/h...e/CIMG9694.jpg

Also Check Out My .50 Cal Canon & The CELL PHONE .380 Gun

http://i259.photobucket.com/albums/h...y03joe/2_2.jpg

http://i259.photobucket.com/albums/h...%20Phone_1.jpg
http://i259.photobucket.com/albums/h...0Phone%202.jpg

Get The Cell Phone Gun At>>> IdealConceal.com

Re: Has Any One Used This Door Adj Tool
 

Do I Have To Loosen The striker First ????

Re: Has Any One Used This Door Adj Tool
 

No. PM sent

Re: Has Any One Used This Door Adj Tool
 

OP, Unless you have some VERY unusual situation (somebody lifted your truck on a hoist & caught the open door on something or similar) there really isn't a place where you should need that tool on one of these trucks. The hinges move easily & have plenty of adjustment unless you are working with some poor aftermarket door or something.
Tools like that became popular as the welded on hinges became "the norm". My advice...Try to figure out what is really wrong & fix it instead of bending whatever gives first. Lorne

Re: Has Any One Used This Door Adj Tool
 

Thank You All For Your Input
Harley03joe :smoke: :smoke: :smoke: