The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 70 K10 blower motor (https://67-72chevytrucks.com/vboard/showthread.php?t=729007)

Mav	01-30-2017 07:34 PM

70 K10 blower motor

Anybody ever remove the bottom screw in less than 1/2 hour w/out taking inner fender off?

custom10nut

01-30-2017 08:49 PM

Re: 70 K10 blower motor

It's easy when you take the hood hinge loose and prop ithe hood up out of the way.

Andy4639

01-30-2017 09:24 PM

Re: 70 K10 blower motor

Quote:

Originally Posted by Mav (Post 7843349)

Anybody ever remove the bottom screw in less than 1/2 hour w/out taking inner fender off?

Wait until you have to take the whole heater box out!:lol:

saxart

01-30-2017 09:42 PM

Re: 70 K10 blower motor

You could always do the same thing the PO did to my truck's inner fender...

http://i15.photobucket.com/albums/a3...eel%20Well.jpg

RB72	01-31-2017 12:35 AM

Re: 70 K10 blower motor

Quote:

Originally Posted by custom10nut (Post 7843411)

It's easy when you take the hood hinge loose and prop ithe hood up out of the way.

That was the best way I found to do it!

CG	01-31-2017 12:57 AM

Re: 70 K10 blower motor

Looks like a fun job, mine is starting to howl now and then. Add it to the list haha.

Mav	01-31-2017 08:06 AM

Re: 70 K10 blower motor

Hadnt thought of that saxart, but think I will wait till I have reason to take inner fender loose and put bottom screw back in...

chiefcfd

01-31-2017 08:32 AM

Re: 70 K10 blower motor

I have taken the inner fender loose and done this. It was my 2wd though. Looking at the hole in saxart's post you could drill a hole and plug with a rubber plug.

All times are GMT -4. The time now is 04:13 AM.