The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   6.0 into a 72 K10 Do I have to move tranny forward? (https://67-72chevytrucks.com/vboard/showthread.php?t=733768)

suburban99 03-26-2017 01:24 PM

6.0 into a 72 K10 Do I have to move tranny forward?
 
3 Attachment(s)
Need a little help here guys. In the process of swapping a 6.0 LQ4 into my 72 K10 and I cannot get engine back far enough to mate the TH350. I am using LSX innovation swap plates at the farthest hole forward. The head touches the firewall before I get the tranny bolts in. I have removed part of the mount pads off the frame to get it closer but can't get it all the way in. Any help appreciated.

Bigdav160 03-26-2017 03:26 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Good time to put in a 4L60e. That will push the engine forward a couple inches.

suburban99 03-26-2017 04:11 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Tranny shifts good and is recently rebuilt....
Looks like the stock crissmember won't work either..

Bigdav160 03-26-2017 05:05 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Nope, you need one for this specific conversion. $300-$400

72MARIO 03-26-2017 10:47 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
I think you can use off road designs crossmember to solve the clearance issues. Otherwise you looking at dirty dingos 4x4 crossmember

mongocanfly 03-26-2017 11:30 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
I used ebay adapters on mine..had no clearance issues...they kept the rear of the LS engine in the same postion as the smallblock..didn't have to move anything...until I put that nv4500 behind it..then I had to move my trans crossmember back 1 1/2"

suburban99 03-31-2017 02:09 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Picked up the Dirty Dingo crossmember kit today after talking on the phone with them. Still had to mod the firewall a bit as valve covers are almost touching stock firewall with TH 350 in stock location. Don't want to change tranny or driveshafts as truck drives smooth...Pic to follow.

nastety92 03-31-2017 02:24 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Do you know what motor mount pads those are? Looking for a part number.

Thanks,
Nick

suburban99 03-31-2017 02:26 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Quote:

Originally Posted by nastety92 (Post 7902391)
Do you know what motor mount pads those are? Looking for a part number.

Thanks,
Nick

i Can look after work..you mean the 3 bolt stock Chevrolet with the single bolt to crossmember?

nastety92 03-31-2017 02:27 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
Quote:

Originally Posted by suburban99 (Post 7902395)
i Can look after work..you mean the 3 bolt stock Chevrolet with the single bolt to crossmember?

Yes, that would be great thanks.

suburban99 04-01-2017 03:46 PM

Re: 6.0 into a 72 K10 Do I have to move tranny forward?
 
1 Attachment(s)
Quote:

Originally Posted by nastety92 (Post 7902397)
Yes, that would be great thanks.

Here's a pic... might be 2282 xxxx? Good luck


All times are GMT -4. The time now is 05:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com