Clutch pedal mounting bracket?
 

Hey all -
Installing a 350 SBC in my 66 C-10 and my mechanic is saying there is no place to mount bracket for clutch linkage on the 350 as there is on side of the 6 cylinder block that we pulled out.
Is there a kit offered to adapt that to the 350 block?
Thanks!

Re: Clutch pedal mounting bracket?
 

The pivot ball that is mounted on a 6 cyl bracket comes off and screws right into the SBC above the oil filer

Re: Clutch pedal mounting bracket?
 

You can buy a screw in pivot ball for that, but it seems like I read some of the newer blocks do not have a hole drilled and tapped for it. This could be the case here.

Re: Clutch pedal mounting bracket?
 

The clutch bellcrank ballstud screws directly into the block in the forward position. Of course this is assuming that the engine was installed in the correct factory location for a small block. Also as said above, some blocks do not have the boss for a clutch bellcrank ballstud.