The 1947 - Present Chevrolet & GMC Truck Message Board Network - CO ISO

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - CO ISO - rear seat floor plates etc.. (https://67-72chevytrucks.com/vboard/showthread.php?t=740736)

CK5	06-22-2017 12:55 PM

ISO - rear seat floor plates etc..

2 Attachment(s)

Looking for the 4 rear seat floor plates as well as the 2 captured nut plates for mounting the front of the rear seat.

Also need the 6 bolts used to bolt the rear seat down. Attached pics of what I'm looking for, thanks.

Blazerowner

06-25-2017 05:50 PM

Re: ISO - rear seat floor plates etc..

You would be better off making them yourself. That's what I did. You can buy those cage nuts from McMaster car far pretty cheap. I bought some sheet metal stock from tractor supply and cut the plates myself. Hard to tell it's not original and my blazer didn't come with a rear seat.

1rippen6

07-17-2017 09:12 PM

Re: ISO - rear seat floor plates etc..

1 Attachment(s)

I found 2 they do have some pitting I probably have the nuts also but would have to empty out the blazer and see if they are still there. I can't look underneath they sprayed the underneath with spray foam. Do you also need the channel that goes underneath for the rear seat mounts?

CK5	07-18-2017 03:04 PM

Re: ISO - rear seat floor plates etc..

I might be interested in the underneath channel as long as it is from a 71-72.

1rippen6

07-18-2017 03:07 PM

Re: ISO - rear seat floor plates etc..

Quote:

Originally Posted by CK5 (Post 7993916)

I might be interested in the underneath channel as long as it is from a 71-72.

Yep, has to be from a 71 or 72 never owned a 69 or 70. I have plans tonight will post a picture tomorrow.

1rippen6

07-18-2017 03:08 PM

Re: ISO - rear seat floor plates etc..

Do you still need the other parts or are you good.

CK5	07-18-2017 03:16 PM

Re: ISO - rear seat floor plates etc..

Quote:

Originally Posted by 1rippen6 (Post 7993918)

Do you still need the other parts or are you good.

Thanks, I'll let you know, going to check out some local part outs this week.

1rippen6

07-19-2017 09:34 PM

Re: ISO - rear seat floor plates etc..

2 Attachment(s)

Here is the channel it had a broken bolt so I welded a nut on what was left and heated the nut up. Threads look fine on all 4 nuts does have some pitting but no thin spots. 60 plus shipping if interested send me you zip and I will get a shipping quote.

CK5	07-21-2017 07:53 PM

Re: ISO - rear seat floor plates etc..

Thanks for the pics 1rippen6, I was able to get all the parts I needed today locally.

1rippen6

07-21-2017 11:10 PM

Re: ISO - rear seat floor plates etc..

Quote:

Originally Posted by CK5 (Post 7996628)

Thanks for the pics 1rippen6, I was able to get all the parts I needed today locally.

No problem

2006gmcdmax

07-23-2017 08:40 PM

Re: ISO - rear seat floor plates etc..

I'm searching for that lower channel too for my 72 Blazer. I'm willing to pay up for a clean one like the one in the picture.

1rippen6

07-23-2017 09:54 PM

Re: ISO - rear seat floor plates etc..

Quote:

Originally Posted by 2006gmcdmax (Post 7998099)

I'm searching for that lower channel too for my 72 Blazer. I'm willing to pay up for a clean one like the one in the picture.

PM returned

All times are GMT -4. The time now is 09:07 AM.