The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KS '71 2WD Frame Cuts (https://67-72chevytrucks.com/vboard/showthread.php?t=743959)

Ironhorse 08-05-2017 12:11 PM

'71 2WD Frame Cuts
 
4 Attachment(s)
Parting out a '71 Chevy 2wd long bed frame. All the brackets, frame cross members and such in good condition, just dirty and surface scale from the years of road use. Prices do not include shipping, money order only, do not have Paypal.

Rear frame horns/rails, cut to your length - straight, holes good- $30
Bed mounts - all 6 - $30
Rear cab mounts - $15
Rear bump stops - $15
Carrier Bearing X-member w/trailing arm brackets - $40
All other X-members - $25 each

Ironhorse 08-08-2017 09:05 AM

Re: '71 2WD Frame Cuts
 
To Da Top

ryans69chevy 08-10-2017 07:39 PM

Re: '71 2WD Frame Cuts
 
Any way to get just one of the trailing arm brackets? I just need the passenger side.

Ironhorse 08-10-2017 11:41 PM

Re: '71 2WD Frame Cuts
 
Don't want to break up a set by selling just the one bracket. Will sell the pair for $15 plus shipping if you want to do that.

ryans69chevy 08-11-2017 08:55 PM

Re: '71 2WD Frame Cuts
 
Let's do it! Let me know how you want to be paid.

Ironhorse 08-12-2017 06:05 AM

Re: '71 2WD Frame Cuts
 
Quote:

Originally Posted by ryans69chevy (Post 8014602)
Let's do it! Let me know how you want to be paid.

Trailing Arm Brackets SOLD, payment pending.

Payment by money order works as mentioned in the first posting. I will get the brackets removed quick as I can, may be a couple days before have them off. Been having a LOT of rain going on. Will PM you with total cost to include shipping when brackets are removed and ready to ship.

ScottH 08-12-2017 08:56 AM

Re: '71 2WD Frame Cuts
 
Ironhorse, I could use the small bar that runs between the frame in the middle of the last 2 frame x members, shown in pic 2 & 3. I think its to help support the spare tire.

Thanks
Scott

ryans69chevy 08-12-2017 09:22 AM

Re: '71 2WD Frame Cuts
 
Perfect! I'm not in a big rush so feel free to take your time! Thanks!

Cbo 08-12-2017 07:38 PM

Re: '71 2WD Frame Cuts
 
How much for the cross member that the trailing arms attached to, minus the trailing arms brackets that you've already sold? @ironhorse

Ironhorse 08-12-2017 07:55 PM

Re: '71 2WD Frame Cuts
 
Quote:

Originally Posted by ScottH (Post 8014854)
Ironhorse, I could use the small bar that runs between the frame in the middle of the last 2 frame x members, shown in pic 2 & 3. I think its to help support the spare tire.

Thanks
Scott

ScottH, the small cross bar is yours for $25 plus shipping. As mentioned may be a few days before I can get back to stripping the frame.

We have gotten just over 51 inches of rain this year since first of Jan. Normal rainfall for the year is 30-32 inches all year long. Sure makes it a hard time to mow the two acres we have.

Ironhorse 08-12-2017 08:00 PM

Re: '71 2WD Frame Cuts
 
Quote:

Originally Posted by Cbo (Post 8015208)
How much for the cross member that the trailing arms attached to, minus the trailing arms brackets that you've already sold? @ironhorse

Cbo, I had figured $40 for that one since it had the trailing arm brackets still attached. Since those have been sold to ryans69chevy for $15, how about the $25 as mentioned for any one cross member? Again, dealing with the wet weather will be a bit before I can get everything removed. Shipping may be a bit since it is fairly heavy I'm sure.

ryans69chevy 08-29-2017 07:14 PM

Re: '71 2WD Frame Cuts
 
Just checking in to see if the rain got a chance to let up at all. Any chance I could get the brackets by the middle or end of Sept? Prob won't get to that part until then. Let me know!

Thanks

Ironhorse 08-29-2017 08:07 PM

Re: '71 2WD Frame Cuts
 
Quote:

Originally Posted by ryans69chevy (Post 8027877)
Just checking in to see if the rain got a chance to let up at all. Any chance I could get the brackets by the middle or end of Sept? Prob won't get to that part until then. Let me know!

Thanks

Rain finally has let up and am playing catch up on our 2 acres. Hope to have the brackets off tomorrow or Thursday and will get you a total with shipping. Sorry been a bit slow on this, normally try to get a quicker response to members wanting parts. :waah: :chevy:

ryans69chevy 08-29-2017 10:46 PM

Re: '71 2WD Frame Cuts
 
No worries man! Just checking in! Like I said before take your time. I won't be getting to that part of the build until the end of Sept anyway. BTW I wish I had 2 acres... that might give me enough room for the shop I want!

Cbo 09-03-2017 06:43 AM

Re: '71 2WD Frame Cuts
 
Quote:

Originally Posted by Ironhorse (Post 8027919)
Rain finally has let up and am playing catch up on our 2 acres. Hope to have the brackets off tomorrow or Thursday and will get you a total with shipping. Sorry been a bit slow on this, normally try to get a quicker response to members wanting parts. :waah: :chevy:

Hey bud, when you get the brackets off,let me know how much for the trailing arms crossmember, shipped to 08330. No rush here!

Ironhorse 09-03-2017 10:07 AM

Re: '71 2WD Frame Cuts
 
Cbo, sorry but no longer have the frame or that cross member. I posted back the same day you asked and did not get a response from you after you asked about $$ for the part. Three weeks of listing the frame on the board brought no further interest from anyone and decided to cut the frame for scrap. Figured after not hearing from you in three weeks time you had no further interest in the cross member. :waah:

Ryan, I have the trailing arm brackets free from the frame and am removing the hardened factory hot rivets. Taking a bit of time by drilling and punching the rivets. Will have them done shortly tho. Need to get them boxed and get a shipping quote for you.

ryans69chevy 09-03-2017 11:59 AM

Re: '71 2WD Frame Cuts
 
Right on! Thanks for the update.

Ironhorse 09-03-2017 08:52 PM

Re: '71 2WD Frame Cuts
 
Ryan, trailing arm brackets are off and all factory hot rivets removed. PM sent with shipping / payment info.

ryans69chevy 09-15-2017 05:51 PM

Re: '71 2WD Frame Cuts
 
Gary, just received the brackets! Thanks for taking the time to remove them carefully. They are perfect!

PAPABEAR 11-03-2017 03:02 AM

Re: '71 2WD Frame Cuts
 
By chance do you still have the trailing arms?

Ironhorse 11-03-2017 06:34 AM

Re: '71 2WD Frame Cuts
 
Sorry I don't, the trailing arms were badly rusted and went to the scrap yard early on. The rest of the frame has now followed that. Nothing left.


All times are GMT -4. The time now is 06:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com