KS '71 2WD Frame Cuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 08-05-2017, 12:11 PM

Parting out a '71 Chevy 2wd long bed frame. All the brackets, frame cross members and such in good condition, just dirty and surface scale from the years of road use. Prices do not include shipping, money order only, do not have Paypal.

Rear frame horns/rails, cut to your length - straight, holes good- $30
Bed mounts - all 6 - $30
Rear cab mounts - $15
Rear bump stops - $15
Carrier Bearing X-member w/trailing arm brackets - $40
All other X-members - $25 each

**Ironhorse** · 08-08-2017, 09:05 AM

To Da Top

ryans69chevy · 08-10-2017, 07:39 PM

Any way to get just one of the trailing arm brackets? I just need the passenger side.

**Ironhorse** · 08-10-2017, 11:41 PM

Don't want to break up a set by selling just the one bracket. Will sell the pair for $15 plus shipping if you want to do that.

ryans69chevy · 08-11-2017, 08:55 PM

Let's do it! Let me know how you want to be paid.

**Ironhorse** · 08-12-2017, 06:05 AM

Quote:

Originally Posted by ryans69chevy

Let's do it! Let me know how you want to be paid.

Trailing Arm Brackets SOLD, payment pending.

Payment by money order works as mentioned in the first posting. I will get the brackets removed quick as I can, may be a couple days before have them off. Been having a LOT of rain going on. Will PM you with total cost to include shipping when brackets are removed and ready to ship.

**ScottH** · 08-12-2017, 08:56 AM

Ironhorse, I could use the small bar that runs between the frame in the middle of the last 2 frame x members, shown in pic 2 & 3. I think its to help support the spare tire.

Thanks
Scott

ryans69chevy · 08-12-2017, 09:22 AM

Perfect! I'm not in a big rush so feel free to take your time! Thanks!

Cbo · 08-12-2017, 07:38 PM

How much for the cross member that the trailing arms attached to, minus the trailing arms brackets that you've already sold? @ironhorse

**Ironhorse** · 08-12-2017, 07:55 PM

Quote:

Originally Posted by ScottH

Ironhorse, I could use the small bar that runs between the frame in the middle of the last 2 frame x members, shown in pic 2 & 3. I think its to help support the spare tire.

Thanks
Scott

ScottH, the small cross bar is yours for $25 plus shipping. As mentioned may be a few days before I can get back to stripping the frame.

We have gotten just over 51 inches of rain this year since first of Jan. Normal rainfall for the year is 30-32 inches all year long. Sure makes it a hard time to mow the two acres we have.

**Ironhorse** · 08-12-2017, 08:00 PM

Quote:

Originally Posted by Cbo

How much for the cross member that the trailing arms attached to, minus the trailing arms brackets that you've already sold? @ironhorse

Cbo, I had figured $40 for that one since it had the trailing arm brackets still attached. Since those have been sold to ryans69chevy for $15, how about the $25 as mentioned for any one cross member? Again, dealing with the wet weather will be a bit before I can get everything removed. Shipping may be a bit since it is fairly heavy I'm sure.

ryans69chevy · 08-29-2017, 07:14 PM

Just checking in to see if the rain got a chance to let up at all. Any chance I could get the brackets by the middle or end of Sept? Prob won't get to that part until then. Let me know!

Thanks

**Ironhorse** · 08-29-2017, 08:07 PM

Quote:

Originally Posted by ryans69chevy

Just checking in to see if the rain got a chance to let up at all. Any chance I could get the brackets by the middle or end of Sept? Prob won't get to that part until then. Let me know!

Thanks

Rain finally has let up and am playing catch up on our 2 acres. Hope to have the brackets off tomorrow or Thursday and will get you a total with shipping. Sorry been a bit slow on this, normally try to get a quicker response to members wanting parts.

ryans69chevy · 08-29-2017, 10:46 PM

No worries man! Just checking in! Like I said before take your time. I won't be getting to that part of the build until the end of Sept anyway. BTW I wish I had 2 acres... that might give me enough room for the shop I want!

Cbo · 09-03-2017, 06:43 AM

Quote:

Originally Posted by Ironhorse

Rain finally has let up and am playing catch up on our 2 acres. Hope to have the brackets off tomorrow or Thursday and will get you a total with shipping. Sorry been a bit slow on this, normally try to get a quicker response to members wanting parts.

Hey bud, when you get the brackets off,let me know how much for the trailing arms crossmember, shipped to 08330. No rush here!

**Ironhorse** · 09-03-2017, 10:07 AM

Cbo, sorry but no longer have the frame or that cross member. I posted back the same day you asked and did not get a response from you after you asked about $$ for the part. Three weeks of listing the frame on the board brought no further interest from anyone and decided to cut the frame for scrap. Figured after not hearing from you in three weeks time you had no further interest in the cross member.

Ryan, I have the trailing arm brackets free from the frame and am removing the hardened factory hot rivets. Taking a bit of time by drilling and punching the rivets. Will have them done shortly tho. Need to get them boxed and get a shipping quote for you.

ryans69chevy · 09-03-2017, 11:59 AM

Right on! Thanks for the update.

**Ironhorse** · 09-03-2017, 08:52 PM

Ryan, trailing arm brackets are off and all factory hot rivets removed. PM sent with shipping / payment info.

ryans69chevy · 09-15-2017, 05:51 PM

Gary, just received the brackets! Thanks for taking the time to remove them carefully. They are perfect!

PAPABEAR · 11-03-2017, 03:02 AM

By chance do you still have the trailing arms?

**Ironhorse** · 11-03-2017, 06:34 AM

Sorry I don't, the trailing arms were badly rusted and went to the scrap yard early on. The rest of the frame has now followed that. Nothing left.

08-05-2017, 12:11 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	'71 2WD Frame Cuts Parting out a '71 Chevy 2wd long bed frame. All the brackets, frame cross members and such in good condition, just dirty and surface scale from the years of road use. Prices do not include shipping, money order only, do not have Paypal. Rear frame horns/rails, cut to your length - straight, holes good- $30 Bed mounts - all 6 - $30 Rear cab mounts - $15 Rear bump stops - $15 Carrier Bearing X-member w/trailing arm brackets - $40 All other X-members - $25 each Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-08-2017, 09:05 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '71 2WD Frame Cuts To Da Top __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-10-2017, 07:39 PM	#3
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Any way to get just one of the trailing arm brackets? I just need the passenger side.

08-10-2017, 11:41 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '71 2WD Frame Cuts Don't want to break up a set by selling just the one bracket. Will sell the pair for $15 plus shipping if you want to do that. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-11-2017, 08:55 PM	#5
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Let's do it! Let me know how you want to be paid.

08-12-2017, 08:56 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: '71 2WD Frame Cuts Ironhorse, I could use the small bar that runs between the frame in the middle of the last 2 frame x members, shown in pic 2 & 3. I think its to help support the spare tire. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-12-2017, 09:22 AM	#8
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Perfect! I'm not in a big rush so feel free to take your time! Thanks!

08-12-2017, 07:38 PM	#9
Cbo Registered User Join Date: Sep 2016 Location: Mays landing, New Jersey Posts: 119	Re: '71 2WD Frame Cuts How much for the cross member that the trailing arms attached to, minus the trailing arms brackets that you've already sold? @ironhorse

08-29-2017, 07:14 PM	#12
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Just checking in to see if the rain got a chance to let up at all. Any chance I could get the brackets by the middle or end of Sept? Prob won't get to that part until then. Let me know! Thanks

08-29-2017, 10:46 PM	#14
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts No worries man! Just checking in! Like I said before take your time. I won't be getting to that part of the build until the end of Sept anyway. BTW I wish I had 2 acres... that might give me enough room for the shop I want!

09-03-2017, 10:07 AM	#16
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '71 2WD Frame Cuts Cbo, sorry but no longer have the frame or that cross member. I posted back the same day you asked and did not get a response from you after you asked about $$ for the part. Three weeks of listing the frame on the board brought no further interest from anyone and decided to cut the frame for scrap. Figured after not hearing from you in three weeks time you had no further interest in the cross member. Ryan, I have the trailing arm brackets free from the frame and am removing the hardened factory hot rivets. Taking a bit of time by drilling and punching the rivets. Will have them done shortly tho. Need to get them boxed and get a shipping quote for you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-03-2017, 11:59 AM	#17
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Right on! Thanks for the update.

09-03-2017, 08:52 PM	#18
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '71 2WD Frame Cuts Ryan, trailing arm brackets are off and all factory hot rivets removed. PM sent with shipping / payment info. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-15-2017, 05:51 PM	#19
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: '71 2WD Frame Cuts Gary, just received the brackets! Thanks for taking the time to remove them carefully. They are perfect!

11-03-2017, 03:02 AM	#20
PAPABEAR Registered User Join Date: Dec 2012 Location: la puente so cal Posts: 51	Re: '71 2WD Frame Cuts By chance do you still have the trailing arms?



Register or Log In To remove these advertisements.

11-03-2017, 06:34 AM	#21
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: '71 2WD Frame Cuts Sorry I don't, the trailing arms were badly rusted and went to the scrap yard early on. The rest of the frame has now followed that. Nothing left. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-03-2017 at 06:39 AM.

Register or Log In To remove these advertisements.