The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Wiper transmission arm question (https://67-72chevytrucks.com/vboard/showthread.php?t=745829)

tim71

09-01-2017 06:59 PM

Wiper transmission arm question

1 Attachment(s)

Is there a trick to getting this clip to secure itself to the post that holds both wiper transmission arms? I've spent a lot of time on what is probably a 20 second job.

71CHEVYSHORTBED402

09-01-2017 07:28 PM

Re: Wiper transmission arm question

1 Attachment(s)

Quote:

Originally Posted by tim71 (Post 8029995)

Is there a trick to getting this clip to secure itself to the post that holds both wiper transmission arms? I've spent a lot of time on what is probably a 20 second job.

Insert the clip into the pin from the top. Should be real easy. Perhaps the arms aren't assembled right? Anyway, it should look like this.

Incidentally Tim, if you haven't got one of these or similar, this tool is the stuff for pulling & attaching wiper arms. It will make your life easier and is damage prevention. https://store.snapon.com/Window-and-...l-P636287.aspx

AussieinNC

09-01-2017 07:35 PM

Re: Wiper transmission arm question

Quote:

Originally Posted by tim71 (Post 8029995)

Is there a trick to getting this clip to secure itself to the post that holds both wiper transmission arms? I've spent a lot of time on what is probably a 20 second job.

The clip in your pic is missing the retainer turn up...it may fit on but it will fall off when you start using it.

The bottom photo clip shows the little bend on the end that retains the clip.

tim71

09-02-2017 07:17 AM

Re: Wiper transmission arm question

Thanks for the help, I can see how to install it now.

All times are GMT -4. The time now is 07:50 AM.