![]() |
Cab cuts, most cuts $45ea plus shipping
1 Attachment(s)
Let me know what you need...good door corners, nice drip rails. I have this cab and the 68 c30 I’m parting out...
|
Re: Cab cuts, most cuts $45ea plus shipping
1 Attachment(s)
Another pic
|
Re: Cab cuts, most cuts $45ea plus shipping
Hi Randy Im looking for the rear cab section just above the bottom pinch weld
the black cab providing cab corners clean no rust holes very interested my shipping address is in ogensburg ny |
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
Med flat rate box is about $14 to ship
|
Re: Cab cuts, most cuts $45ea plus shipping
Hi Randy the entire back of the cab from the bottom of the window down.
|
Re: Cab cuts, most cuts $45ea plus shipping
Randy can i give you a call if possible
|
Re: Cab cuts, most cuts $45ea plus shipping
1 Attachment(s)
What about the inside of cab at the top of door where the door seal goes. Are they any good on either side?
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
how about the area around the gas pedal -where your heel rests! & there is pivot pin studs there ?? thanks mike
|
Re: Cab cuts, most cuts $45ea plus shipping
right and left drip rails ?
|
Re: Cab cuts, most cuts $45ea plus shipping
How much for the raised part of the A pillars where the courtesy light switches go? About 1/2" out around the raised portion.
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
Money sent for the parts. Thanks
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
1 Attachment(s)
Quote:
|
Re: Cab cuts, most cuts $45ea plus shipping
1 Attachment(s)
How is this area on your donor cab? I think my truck was rear ended pretty hard.
|
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
On the inside I will cut the floor between the back of the cab and the rear floor cross brace. |
Re: Cab cuts, most cuts $45ea plus shipping
I guess you're right. There are a lot of spot welds in that area. I'm getting ready to put in a new one piece floor so I may be able to dolly some of mine out. The dang right angle braces from the floor to the back wall are totally in the way right now though.
I will keep your piece in mind. Thanks! |
Re: Cab cuts, most cuts $45ea plus shipping
Randy 500,
I’m interested in the same area that kxmotox247 wanted except all the way to include the cab corners and 6 inches higher. Need shipping to 30068. Todd |
Re: Cab cuts, most cuts $45ea plus shipping
Quote:
Same price for the cut... |
Re: Cab cuts, most cuts $45ea plus shipping
Randy,
All of that sounds fine including cutting in half. I want to preserve the back of the cab as well and the rust on my cab corners went about 6 inches higher than replacement cab corners. Please PM me with total and your payment info. Thanks Todd |
Re: Cab cuts, most cuts $45ea plus shipping
Drip rails and roof ? .... Shipping to 36575
|
| All times are GMT -4. The time now is 07:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com