WA Cab cuts, most cuts $45ea plus shipping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 10-28-2017, 08:52 PM

Let me know what you need...good door corners, nice drip rails. I have this cab and the 68 c30 I’m parting out...

*randy500* · 10-28-2017, 08:53 PM

Another pic

breaker · 10-28-2017, 09:28 PM

Hi Randy Im looking for the rear cab section just above the bottom pinch weld
the black cab providing cab corners clean no rust holes very interested my
shipping address is in ogensburg ny

breaker · 10-28-2017, 09:35 PM

Quote:

Originally Posted by breaker

Hi Randy Im looking for the rear cab section just above the bottom pinch weld
the black cab providing cab corners clean no rust holes very interested my
shipping address is in ogensburg ny

sorry randy bottom pinch of the rear glass

*randy500* · 10-28-2017, 09:56 PM

Quote:

Originally Posted by breaker

sorry randy bottom pinch of the rear glass

Which part you need? Center, corner? and length?

*randy500* · 10-28-2017, 09:57 PM

Med flat rate box is about $14 to ship

breaker · 10-29-2017, 11:05 AM

Hi Randy the entire back of the cab from the bottom of the window down.

breaker · 10-29-2017, 12:57 PM

Randy can i give you a call if possible

**Jcfcamaro** · 10-29-2017, 01:09 PM

What about the inside of cab at the top of door where the door seal goes. Are they any good on either side?

*randy500* · 10-29-2017, 01:41 PM

Quote:

Originally Posted by breaker

Randy can i give you a call if possible

Sending pm now

*randy500* · 10-29-2017, 01:42 PM

Quote:

Originally Posted by Jcfcamaro

What about the inside of cab at the top of door where the door seal goes. Are they any good on either side?

I’m using the headliner for my crew cab

wahl4m · 10-29-2017, 06:57 PM

how about the area around the gas pedal -where your heel rests! & there is pivot pin studs there ?? thanks mike

kiwikid · 10-29-2017, 10:33 PM

right and left drip rails ?

**RodnRudy** · 10-30-2017, 05:08 PM

How much for the raised part of the A pillars where the courtesy light switches go? About 1/2" out around the raised portion.

*randy500* · 10-30-2017, 05:19 PM

Quote:

Originally Posted by RodnRudy

How much for the raised part of the A pillars where the courtesy light switches go? About 1/2" out around the raised portion.

Simple enough, how about $47 shipped for the pair? There is a link to my PayPal in my signature line, put a note in PayPal of what your paying for.

**RodnRudy** · 10-30-2017, 05:45 PM

Money sent for the parts. Thanks

*randy500* · 10-30-2017, 06:22 PM

Quote:

Originally Posted by RodnRudy

Money sent for the parts. Thanks

I need your address...

*randy500* · 10-30-2017, 06:22 PM

Quote:

Originally Posted by RodnRudy

Money sent for the parts. Thanks

Your parts, tracking in a few...

kxmotox247 · 10-30-2017, 10:36 PM

How is this area on your donor cab? I think my truck was rear ended pretty hard.

*randy500* · 10-30-2017, 11:16 PM

Quote:

Originally Posted by kxmotox247

How is this area on your donor cab? I think my truck was rear ended pretty hard.

That part is good, kind of hard to cut out, I will cut that for $50,I would estimate shipping at $45 due to size and distance. If you want it send me dimensions....I will tape it off and send you pic for approval before I cut it.
On the inside I will cut the floor between the back of the cab and the rear floor cross brace.

kxmotox247 · 10-31-2017, 12:02 AM

I guess you're right. There are a lot of spot welds in that area. I'm getting ready to put in a new one piece floor so I may be able to dolly some of mine out. The dang right angle braces from the floor to the back wall are totally in the way right now though.
I will keep your piece in mind. Thanks!

Tdrcreyn4 · 10-31-2017, 09:23 AM

Randy 500,

I’m interested in the same area that kxmotox247 wanted except all the way to include the cab corners and 6 inches higher. Need shipping to 30068.

Todd

*randy500* · 10-31-2017, 12:06 PM

Quote:

Originally Posted by Tdrcreyn4

Randy 500,

I’m interested in the same area that kxmotox247 wanted except all the way to include the cab corners and 6 inches higher. Need shipping to 30068.

Todd

I could do that cut but I think both cabs I have need cab corners, they only have a small rust area though, I usually graft in 5” high and around the corner towards the bed preserving the back of the cab. Shipping would be pretty high, I could cut it in half which would probably half the shipping.
Same price for the cut...

Tdrcreyn4 · 10-31-2017, 02:34 PM

Randy,

All of that sounds fine including cutting in half. I want to preserve the back of the cab as well and the rust on my cab corners went about 6 inches higher than replacement cab corners. Please PM me with total and your payment info. Thanks

Todd

rayce88 · 10-31-2017, 02:48 PM

Drip rails and roof ? .... Shipping to 36575

10-28-2017, 08:52 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Cab cuts, most cuts $45ea plus shipping Let me know what you need...good door corners, nice drip rails. I have this cab and the 68 c30 I’m parting out... Attached Images

10-28-2017, 08:53 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab cuts, most cuts $45ea plus shipping Another pic Attached Images

10-28-2017, 09:28 PM	#3
breaker Registered User Join Date: Oct 2017 Location: stittsville ontario Posts: 9	Re: Cab cuts, most cuts $45ea plus shipping Hi Randy Im looking for the rear cab section just above the bottom pinch weld the black cab providing cab corners clean no rust holes very interested my shipping address is in ogensburg ny

10-28-2017, 09:57 PM	#6
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab cuts, most cuts $45ea plus shipping Med flat rate box is about $14 to ship

10-29-2017, 11:05 AM	#7
breaker Registered User Join Date: Oct 2017 Location: stittsville ontario Posts: 9	Re: Cab cuts, most cuts $45ea plus shipping Hi Randy the entire back of the cab from the bottom of the window down.

10-29-2017, 12:57 PM	#8
breaker Registered User Join Date: Oct 2017 Location: stittsville ontario Posts: 9	Re: Cab cuts, most cuts $45ea plus shipping Randy can i give you a call if possible

10-29-2017, 01:09 PM	#9
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Cab cuts, most cuts $45ea plus shipping What about the inside of cab at the top of door where the door seal goes. Are they any good on either side? Attached Images

10-29-2017, 06:57 PM	#12
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: Cab cuts, most cuts $45ea plus shipping how about the area around the gas pedal -where your heel rests! & there is pivot pin studs there ?? thanks mike

10-29-2017, 10:33 PM	#13
kiwikid Registered User Join Date: Oct 2017 Location: los angeles Ca Posts: 84	Re: Cab cuts, most cuts $45ea plus shipping right and left drip rails ?

10-30-2017, 05:08 PM	#14
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 932	Re: Cab cuts, most cuts $45ea plus shipping How much for the raised part of the A pillars where the courtesy light switches go? About 1/2" out around the raised portion. __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

10-30-2017, 05:45 PM	#16
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 932	Re: Cab cuts, most cuts $45ea plus shipping Money sent for the parts. Thanks __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

10-30-2017, 10:36 PM	#19
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Re: Cab cuts, most cuts $45ea plus shipping How is this area on your donor cab? I think my truck was rear ended pretty hard. Attached Images __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

10-31-2017, 12:02 AM	#21
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Re: Cab cuts, most cuts $45ea plus shipping I guess you're right. There are a lot of spot welds in that area. I'm getting ready to put in a new one piece floor so I may be able to dolly some of mine out. The dang right angle braces from the floor to the back wall are totally in the way right now though. I will keep your piece in mind. Thanks! __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

10-31-2017, 09:23 AM	#22
Tdrcreyn4 Registered User Join Date: Aug 2013 Location: Atlanta, GA Posts: 702	Re: Cab cuts, most cuts $45ea plus shipping Randy 500, I’m interested in the same area that kxmotox247 wanted except all the way to include the cab corners and 6 inches higher. Need shipping to 30068. Todd __________________ 1968 C10 292/3 spd - sold 1969 K10 350/3 spd/205 - sold 1971 K5 350/4 spd/ 205 - sold 1970 K20 350/350/205 - sold 1969 K20 396/400/205 - work in process

10-31-2017, 02:34 PM	#24
Tdrcreyn4 Registered User Join Date: Aug 2013 Location: Atlanta, GA Posts: 702	Re: Cab cuts, most cuts $45ea plus shipping Randy, All of that sounds fine including cutting in half. I want to preserve the back of the cab as well and the rust on my cab corners went about 6 inches higher than replacement cab corners. Please PM me with total and your payment info. Thanks Todd __________________ 1968 C10 292/3 spd - sold 1969 K10 350/3 spd/205 - sold 1971 K5 350/4 spd/ 205 - sold 1970 K20 350/350/205 - sold 1969 K20 396/400/205 - work in process



Register or Log In To remove these advertisements.

10-31-2017, 02:48 PM	#25
rayce88 Registered User Join Date: Feb 2017 Location: Semmes , AL Posts: 45	Re: Cab cuts, most cuts $45ea plus shipping Drip rails and roof ? .... Shipping to 36575

Register or Log In To remove these advertisements.