The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Low Hump Removal Help (https://67-72chevytrucks.com/vboard/showthread.php?t=760621)

Jferrante

03-30-2018 08:42 PM

Low Hump Removal Help

Adding my High Hump tunnel and firewall piece here in the next few days and started looking at removing the low hump. What is the best way to remove one that isn't bolted down? I know cutting out is the answer but where to begin?
Pictures would be great.
Thanks

LVPhotos

03-31-2018 11:58 AM

Re: Low Hump Removal Help

1 Attachment(s)

Clean flange, look for spot welds, drill out spot welds

LT1 Burb

03-31-2018 12:11 PM

Re: Low Hump Removal Help

Spot welds depend on year, with my 65 the low hump is part of the entire floor. I would cut an 1” short and measure 3x, cut once.

Jferrante

03-31-2018 12:36 PM

Re: Low Hump Removal Help

Yes - no spot welds on mine either. I just cut short and will cut further once everything is in place. thanks

Slammed96

09-19-2018 01:21 PM

Re: Low Hump Removal Help

Looks like I'll be doing a lot of cutting in my 66 then. Picking up a high hump cab for the swap this weekend.

All times are GMT -4. The time now is 07:50 AM.