The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)

- - 1970 c50 (https://67-72chevytrucks.com/vboard/showthread.php?t=760860)

my project is a 1970 C50 truck. it has the rare 6 stud wheels . what other wheels would fit these trucks?

The picture is a bit fuzzy, can you get hub center diameter and bolt circle? If it is the same as the six lug on my brothers 59 then they are the same as the military "deuce and a half" which is a 3 piece wheel, much less dangerous than the two piece split rims. I expect they are plentiful in a 20"

-Richard

There are 22.5 6 bolt wheels out there. They were used up until the late 90s so they are lots of them out there.

Quote:

Originally Posted by buggy5872 (Post 8236424)

There are 22.5 6 bolt wheels out there. They were used up until the late 90s so they are lots of them out there.

I was lucky enough to find a full set on craigslist that the guy originally wanted 600.00 for but as time went on he came down. I eventually got all 6 with good tires for trade , a shop heater I paid 125.00 for and a lawn mower and chainsaw that I had gotten for free. so I was into them 125.00. These are the 22.5" so no tube types or split rims for me. 22.5 widely available. I had them sandblasted and painted them found some center caps and powder coated the caps.