1970 c50 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

darrellkershaw · 04-02-2018, 08:59 PM

my project is a 1970 C50 truck. it has the rare 6 stud wheels . what other wheels would fit these trucks?

rkn463 · 04-11-2018, 09:09 PM

The picture is a bit fuzzy, can you get hub center diameter and bolt circle? If it is the same as the six lug on my brothers 59 then they are the same as the military "deuce and a half" which is a 3 piece wheel, much less dangerous than the two piece split rims. I expect they are plentiful in a 20"

-Richard

**buggy5872** · 04-12-2018, 07:03 AM

There are 22.5 6 bolt wheels out there. They were used up until the late 90s so they are lots of them out there.

luvmytruck · 04-14-2018, 05:09 PM

Quote:

Originally Posted by buggy5872

There are 22.5 6 bolt wheels out there. They were used up until the late 90s so they are lots of them out there.

I was lucky enough to find a full set on craigslist that the guy originally wanted 600.00 for but as time went on he came down. I eventually got all 6 with good tires for trade , a shop heater I paid 125.00 for and a lawn mower and chainsaw that I had gotten for free. so I was into them 125.00. These are the 22.5" so no tube types or split rims for me. 22.5 widely available. I had them sandblasted and painted them found some center caps and powder coated the caps.

04-02-2018, 08:59 PM	#1
darrellkershaw Registered User Join Date: Apr 2018 Location: hopkinsville kentucky Posts: 5	1970 c50 my project is a 1970 C50 truck. it has the rare 6 stud wheels . what other wheels would fit these trucks? Attached Images

04-11-2018, 09:09 PM	#2
rkn463 Registered User Join Date: Jan 2012 Location: Iredell, Texas Posts: 582	Re: 1970 c50 The picture is a bit fuzzy, can you get hub center diameter and bolt circle? If it is the same as the six lug on my brothers 59 then they are the same as the military "deuce and a half" which is a 3 piece wheel, much less dangerous than the two piece split rims. I expect they are plentiful in a 20" -Richard __________________ I may have too many Chevys... Is that possible? 68 c50 pickup build: http://67-72chevytrucks.com/vboard/s...d.php?t=704713

04-12-2018, 07:03 AM	#3
buggy5872 Senior Member Join Date: Jun 2011 Location: North Beaver TWP PA Posts: 833	Re: 1970 c50 There are 22.5 6 bolt wheels out there. They were used up until the late 90s so they are lots of them out there. __________________ ___________________________ 1959 Apache Short Fleetside, 1959 Apache NAPCO Long Stepside, 1957 3100 with 59 fleetside bed 1957 5700 LCF Crew Cab "Big Bertha",1959 GMC F370 1958 GMC 600, 1946 Chevy, 1959 Viking 60 LCF 1974 Elcamino SS, 1979 6500 GMC Tilt Bed Wrecker Big Bertha Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.