The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - WI Factory cab lights and wiring (https://67-72chevytrucks.com/vboard/showthread.php?t=761631)

leisure67

04-12-2018 06:03 PM

Factory cab lights and wiring

3 Attachment(s)

One lense was cracked in half and was glued together. The other four are very nice. All grommets look good. Mice got to the wires so some will need to be replaced. Includes the grommet from the kick board and all new stainless screws.

$75 shipped CONUS or reasonable offer.

jaybatta

04-13-2018 09:28 AM

Re: Factory cab lights and wiring

Where does it plug into? Fuse block?

Thanks

Joe

leisure67

04-13-2018 11:14 AM

Re: Factory cab lights and wiring

Quote:

Originally Posted by jaybatta (Post 8237280)

Where does it plug into? Fuse block?

Thanks

Joe

The hot wire plugs into the light switch and the ground was near the steering column.

jaybatta

04-13-2018 02:11 PM

Re: Factory cab lights and wiring

On the light switch, was it molded into the wiring harness? Or is this something that can be added to any light switch plug?

leisure67

04-13-2018 02:23 PM

Re: Factory cab lights and wiring

Quote:

Originally Posted by jaybatta (Post 8237508)

On the light switch, was it molded into the wiring harness? Or is this something that can be added to any light switch plug?

Plugged into an opening in the light switch plug. I will get pictures when I get home.

leisure67

04-13-2018 03:47 PM

Re: Factory cab lights and wiring

3 Attachment(s)

The wire pictured went in the open opening at the upper right on the plug.

Someone asked about the numbers on the lenses. They are all the same as the one pictured.

leisure67

04-13-2018 03:54 PM

Re: Factory cab lights and wiring

The writing on the lenses is: SAE GUIDE 81A 69 PI

Nicks33

04-13-2018 05:54 PM

Re: Factory cab lights and wiring

Hello, would you consider a offer of $50.00 for the cab lights? Thanks, Nick

Harlowhead1972

04-13-2018 06:48 PM

Re: Factory cab lights and wiring

I'll take them for $75. Thanks, Harlow

jaybatta

04-13-2018 08:40 PM

Re: Factory cab lights and wiring

Quote:

Originally Posted by leisure67 (Post 8237513)

Plugged into an opening in the light switch plug. I will get pictures when I get home.

That'd be great, thank you!

Joe

jaybatta

04-13-2018 08:41 PM

Re: Factory cab lights and wiring

Quote:

Originally Posted by leisure67 (Post 8237565)

The wire pictured went in the open opening at the upper right on the plug.

Someone asked about the numbers on the lenses. They are all the same as the one pictured.

Ahh I see thank you

leisure67

04-14-2018 08:07 AM

Re: Factory cab lights and wiring

Quote:

Originally Posted by Harlowhead1972 (Post 8237685)

I'll take them for $75. Thanks, Harlow

Thanks. PM sent.

Harlowhead1972

04-14-2018 10:42 AM

Re: Factory cab lights and wiring

Paypal sent. Thanks, Harlow

All times are GMT -4. The time now is 06:33 PM.