The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Steering column mount? (https://67-72chevytrucks.com/vboard/showthread.php?t=765586)

68blackbird 06-13-2018 11:17 PM

Steering column mount?
 
1 Attachment(s)
Like to see/hear what you guys did to mount your column to firewall...Kel

mikebte 06-14-2018 12:07 AM

Re: Steering column mount?
 
3 Attachment(s)
I closed up the hole and used this on my tilt column, old mocked up right now. I'll post another once cleaned up and finished.

MiraclePieCo 06-14-2018 02:58 AM

Re: Steering column mount?
 
1 Attachment(s)
Cut an old rubber floor mat to make a seal.

_Ogre 06-14-2018 01:18 PM

Re: Steering column mount?
 
what column? column manufacturer probably has a floor mount

68blackbird 06-14-2018 01:47 PM

Re: Steering column mount?
 
Quote:

Originally Posted by _Ogre (Post 8281235)
what column? column manufacturer probably has a floor mount

GM tilt from Speedway. The only ones I saw there were for flush mount(mikebte). I suppose I could re-shape mine, just looking to see if someone had a better idea, Kel

68blackbird 06-14-2018 01:55 PM

Re: Steering column mount?
 
1 Attachment(s)
This is what I used at dash(SS), thinking might be best option on the bottom.

_Ogre 06-15-2018 03:55 PM

Re: Steering column mount?
 
that's actually the floor mount
i think you need something a little heavier on the dash
i'd hate for the column to come off in your lap driving down the road

68blackbird 06-15-2018 05:01 PM

Re: Steering column mount?
 
1 Attachment(s)
Quote:

Originally Posted by _Ogre (Post 8281994)
that's actually the floor mount
i think you need something a little heavier on the dash
i'd hate for the column to come off in your lap driving down the road

That's what I thought at first, but after reading the Q & A on SW, went ahead and got it...


Quote:

I have 56 Chevy 3200 truck. Could this mount be used as a "upper" mount to the dash as well as a lower mount to the floor, using part #91032978.



Product Owner - mainmotorco
John, we have used them as upper and lower mounts on a few of the trucks we have built.

I had bought this floor mount, after looking at it....again, it will work. I thought because it was a flush mount, it wouldn't work because my floor/firewall was not flat? I have it temporarily screwed down to finish the linkage. Small hole to fill now. Thanks for the input, Kel

Black_Sheep 06-15-2018 06:35 PM

Re: Steering column mount?
 
2 Attachment(s)
I made an aluminum plate and bolted through the toe board.


All times are GMT -4. The time now is 08:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com