WTB - Ignition switch pigtail - 1971
 

I am looking for the plug that comes out of an ignition switch for a 1971 C10. I want to temporarily wire up my ignition switch until I rewire the truck. Anyone have an old harness they can cut that plug off for me along with a few inches of the leads?

Thanks!

Re: WTB - Ignition switch pigtail - 1971
 

Would a pigtail from a '70 3/4 ton CustomCamper/20 work? Had full gauge instrument panel with factory A/C. Pretty sure is totally intact but can look tomorrow for sure. Don't think it was ever hacked on. Let me know if interested.

Re: WTB - Ignition switch pigtail - 1971
 

probably. I don't think the ignition switches changed from 67-72.

Re: WTB - Ignition switch pigtail - 1971
 

Will look at condition tomorrow and get back with you with pictures of what I have.

Re: WTB - Ignition switch pigtail - 1971
 

great, thanks. Please don't cut up a good harness for this.

Re: WTB - Ignition switch pigtail - 1971
 

If Ironhorse doesn't work out I have one ready to ship. Thanks, Harlow
http://67-72chevytrucks.com/vboard/s...d.php?t=758583

Re: WTB - Ignition switch pigtail - 1971
 

is that the one at the bottom of post #2?

Re: WTB - Ignition switch pigtail - 1971
 

Correct. Thanks, Harlow

Re: WTB - Ignition switch pigtail - 1971
 

Pics of the ignition pigtail with about 8'' wire for splicing. One wire has a short piece of shrink wrap about two inches long. Wire checks good with a volt/ohm meter for continuity, no breakage in wire run. $15 shipped if interested, money order or $$, do not have Paypal.

Re: WTB - Ignition switch pigtail - 1971
 

Looks good, maybe I could a shot of the plug head on? If you want to PM me, I can get some money off to you.

Re: WTB - Ignition switch pigtail - 1971
 

Head on pic of the ignition connector and pigtail. Clean, no "hot" spots or melted, burnt areas. LMK if good to go and will PM payment info. Thanks, :chevy:

Re: WTB - Ignition switch pigtail - 1971
 

cant really tell anything by the picture, but I trust you. PM me and Ill send money out tomorrow.

Re: WTB - Ignition switch pigtail - 1971
 

What are you looking to see or not see? No burnt or melted ends for the spade connector slots. If you have any particular areas that need further info will do my best to answer any question.

Re: WTB - Ignition switch pigtail - 1971
 

No, I am good. If you say it's in good shape then let's do it

Re: WTB - Ignition switch pigtail - 1971
 

Sounds good, consider the pigtail yours. PM sent with payment info. Thanks for the purchase. :chevy:

Re: WTB - Ignition switch pigtail - 1971
 

I got the pigtail today, thanks Gary

Re: WTB - Ignition switch pigtail - 1971
 

Thanks for letting me know it arrived and thanks again for the purchase. Have a great weekend. :chevy: