FL WTB - Ignition switch pigtail - 1971 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FL71C10** · 07-31-2018, 05:22 PM

I am looking for the plug that comes out of an ignition switch for a 1971 C10. I want to temporarily wire up my ignition switch until I rewire the truck. Anyone have an old harness they can cut that plug off for me along with a few inches of the leads?

Thanks!

**Ironhorse** · 07-31-2018, 06:09 PM

Would a pigtail from a '70 3/4 ton CustomCamper/20 work? Had full gauge instrument panel with factory A/C. Pretty sure is totally intact but can look tomorrow for sure. Don't think it was ever hacked on. Let me know if interested.

**FL71C10** · 07-31-2018, 06:10 PM

probably. I don't think the ignition switches changed from 67-72.

**Ironhorse** · 07-31-2018, 06:12 PM

Will look at condition tomorrow and get back with you with pictures of what I have.

**FL71C10** · 07-31-2018, 06:14 PM

great, thanks. Please don't cut up a good harness for this.

*Harlowhead1972* · 07-31-2018, 06:54 PM

If Ironhorse doesn't work out I have one ready to ship. Thanks, Harlow
http://67-72chevytrucks.com/vboard/s...d.php?t=758583

**FL71C10** · 07-31-2018, 10:08 PM

is that the one at the bottom of post #2?

*Harlowhead1972* · 08-01-2018, 08:57 AM

Correct. Thanks, Harlow

**Ironhorse** · 08-01-2018, 05:01 PM

Pics of the ignition pigtail with about 8'' wire for splicing. One wire has a short piece of shrink wrap about two inches long. Wire checks good with a volt/ohm meter for continuity, no breakage in wire run. $15 shipped if interested, money order or $$, do not have Paypal.

**FL71C10** · 08-01-2018, 06:54 PM

Quote:

Originally Posted by Ironhorse

Pics of the ignition pigtail with about 8'' wire for splicing. One wire has a short piece of shrink wrap about two inches long. Wire checks good with a volt/ohm meter for continuity, no breakage in wire run. $15 shipped if interested, money order or $$, do not have Paypal.

Looks good, maybe I could a shot of the plug head on? If you want to PM me, I can get some money off to you.

**Ironhorse** · 08-01-2018, 07:09 PM

Head on pic of the ignition connector and pigtail. Clean, no "hot" spots or melted, burnt areas. LMK if good to go and will PM payment info. Thanks,

**FL71C10** · 08-01-2018, 07:11 PM

cant really tell anything by the picture, but I trust you. PM me and Ill send money out tomorrow.

**Ironhorse** · 08-01-2018, 07:21 PM

What are you looking to see or not see? No burnt or melted ends for the spade connector slots. If you have any particular areas that need further info will do my best to answer any question.

**FL71C10** · 08-01-2018, 07:58 PM

No, I am good. If you say it's in good shape then let's do it

**Ironhorse** · 08-01-2018, 08:17 PM

Sounds good, consider the pigtail yours. PM sent with payment info. Thanks for the purchase.

**FL71C10** · 08-09-2018, 09:21 PM

I got the pigtail today, thanks Gary

**Ironhorse** · 08-09-2018, 09:48 PM

Thanks for letting me know it arrived and thanks again for the purchase. Have a great weekend.

07-31-2018, 05:22 PM	#1
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	WTB - Ignition switch pigtail - 1971 I am looking for the plug that comes out of an ignition switch for a 1971 C10. I want to temporarily wire up my ignition switch until I rewire the truck. Anyone have an old harness they can cut that plug off for me along with a few inches of the leads? Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-31-2018, 06:10 PM	#3
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 probably. I don't think the ignition switches changed from 67-72. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-31-2018, 06:12 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Will look at condition tomorrow and get back with you with pictures of what I have. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-31-2018, 06:14 PM	#5
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 great, thanks. Please don't cut up a good harness for this. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

07-31-2018, 06:54 PM	#6
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: WTB - Ignition switch pigtail - 1971 If Ironhorse doesn't work out I have one ready to ship. Thanks, Harlow http://67-72chevytrucks.com/vboard/s...d.php?t=758583

07-31-2018, 06:09 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Would a pigtail from a '70 3/4 ton CustomCamper/20 work? Had full gauge instrument panel with factory A/C. Pretty sure is totally intact but can look tomorrow for sure. Don't think it was ever hacked on. Let me know if interested. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-31-2018, 10:08 PM	#7
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 is that the one at the bottom of post #2? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-01-2018, 08:57 AM	#8
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: WTB - Ignition switch pigtail - 1971 Correct. Thanks, Harlow

08-01-2018, 05:01 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Pics of the ignition pigtail with about 8'' wire for splicing. One wire has a short piece of shrink wrap about two inches long. Wire checks good with a volt/ohm meter for continuity, no breakage in wire run. $15 shipped if interested, money order or $$, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-01-2018, 07:09 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Head on pic of the ignition connector and pigtail. Clean, no "hot" spots or melted, burnt areas. LMK if good to go and will PM payment info. Thanks, Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-01-2018, 07:11 PM	#12
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 cant really tell anything by the picture, but I trust you. PM me and Ill send money out tomorrow. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-01-2018, 07:21 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 What are you looking to see or not see? No burnt or melted ends for the spade connector slots. If you have any particular areas that need further info will do my best to answer any question. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-01-2018, 07:58 PM	#14
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 No, I am good. If you say it's in good shape then let's do it __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-01-2018, 08:17 PM	#15
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Sounds good, consider the pigtail yours. PM sent with payment info. Thanks for the purchase. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-09-2018, 09:21 PM	#16
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: WTB - Ignition switch pigtail - 1971 I got the pigtail today, thanks Gary __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

08-09-2018, 09:48 PM	#17
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB - Ignition switch pigtail - 1971 Thanks for letting me know it arrived and thanks again for the purchase. Have a great weekend. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Register or Log In To remove these advertisements.