The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 1971 C10 Stock Gauge Size? (https://67-72chevytrucks.com/vboard/showthread.php?t=772302)

Taylor21293

09-29-2018 11:58 PM

1971 C10 Stock Gauge Size?

Looking for gauges that will slide right into a stock bezel, does anyone know the sizes of the holes (or gauge size) for a stock C10 bezel?

Mike C

09-30-2018 08:50 AM

Re: 1971 C10 Stock Gauge Size?

Aftermarket 2 1/16” gauges will go in from the front on the stock gauge panel for the 4 lower holes. An aftermarket 3 3/8” tach will fit in the center hole. I did these mods on my Jimmy. I kept the OEM speedo and fuel gauge.

Taylor21293

09-30-2018 09:34 AM

Re: 1971 C10 Stock Gauge Size?

Quote:

Originally Posted by Mike C (Post 8354205)

Do you know what size the OEM speedo and fuel gauge holes or gauges are? I can’t seem to find a straight answer, and I unfortunately don’t have an OEM speedo or fuel gauge

72 k15

09-30-2018 11:04 PM

Re: 1971 C10 Stock Gauge Size?

I could go measure mine for you if he doesn’t respond.

68 P.O.S.

10-01-2018 03:27 PM

Re: 1971 C10 Stock Gauge Size?

5 inch

All times are GMT -4. The time now is 06:11 PM.